Bid Package 08 North Well Field - Garney Construction

TRANSOCKET CONFIGURATIONS AND
CONNECTION DETAILS (CONTINUED)
FIGURE 5-C
Integrity of Connections- When
installing conductors in transockets, it is
the responsibility of the installer to
ensure that all line and load connections
are tight, including the connections
between the CT bus bar and the
connector.
Transocket- Overhead Service
1. For overhead installations, line
conductors must enter the
transocket’s top, top back, or top
sides and connect to transocket’s top
terminals.
2. Load conductors must connect to the
transocket’s bottom terminals and
exit through the transocket’s bottom,
bottom back, or bottom sides.
Transocket- Underground Service
Permissible Entrance and Exit Locations
For Transocket Conductors
1. For underground installations, line
conductors must enter through the
transocket’s bottom, bottom back, or
bottom sides and connect to the
transocket’s bottom terminals.
2. Load conductors must connect to the
transocket’s top terminals and exit
through the top, top back, or top
sides.
3. Reserve adequate space beneath
the transocket for service raceway.
Copyright 2010 Oncor Electric Delivery Company. All rights reserved
53