Bid Package 08 North Well Field - Garney Construction

More documents

Recommendations

Info

Colorado River Municipal Water District Raw Water Supply Well Sites Ward County North Well Field 1. Product Description: ASTM D1785, One piece molded type fitting covers and sheet material, off-white color. 2. Thickness: 30 mil. 3. Connections: Brush on welding adhesive. B. Field Applied Glass Fiber Fabric Jacket System: 1. Insulating Cement/Mastic: ASTM C195; hydraulic setting on mineral wool. 2. Glass Fiber Fabric: a. Cloth: Untreated; 9 oz/sq yd weight. b. Blanket: 1.0 lb/cu ft density. c. Weave: 10 x 10. 3. Indoor Vapor Retarder Finish: a. Cloth: Untreated; 9 oz/sq yd weight. b. Vinyl emulsion type acrylic, compatible with insulation, white color. 2.5 PIPE INSULATION ACCESSORIES A. Adhesives: Compatible with insulation. B. Piping 1½-inch-diameter and smaller: Galvanized steel insulation protection shield. MSS SP-69, Type 40. Length: Based on pipe size and insulation thickness. C. Piping 2-inch-diameter and larger: Wood insulation saddle, hard maple. Inserts length: not less than 6 inches long, matching thickness and contour of adjoining insulation. D. Closed Cell Elastomeric Insulation Pipe Hanger: Polyurethane insert with aluminum single piece construction and self adhesive closure. Thickness to match pipe insulation. E. Tie Wire: 0.048-inch stainless steel with twisted ends on maximum 12-inch centers. F. Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement: ASTM C449/C449M. PART 3 EXECUTION 3.1 EXAMINATION A. Verify piping has been tested before applying insulation materials per Section 22 10 00 - Plumbing and Piping. B. Verify surfaces are clean and dry, with foreign material removed. 3.2 INSTALLATION - HEAT TRACE A. Heat Trace: install on all exterior pipes beneath pipe insulation according to manufacturer instructions. B. Heat Trace Exposed to View in Outdoor Finished Spaces: Locate heat trace and cover seams in least visible locations. May 18, 2012 Plumbing Insulation Revision 0 22 07 00 - 4
Colorado River Municipal Water District Raw Water Supply Well Sites Ward County North Well Field C. Heat trace shall be labeled in order to identify and warn of heat trace location. D. Gland entry kit shall be used to transition heat trace into a junction box when making connections of a pipe or tank. It may be used for power splice or tee connections. 3.3 INSTALLATION - PIPING SYSTEMS A. Exterior Piping: Insulate fittings, joints, and valves with insulation of like material and thickness as adjoining pipe, and finish with glass mesh reinforced vapor retarder cement. Cover with jacket with seams located at 3 or 9 o’clock position on side of horizontal piping with overlap facing down to shed water or on bottom side of horizontal piping. END OF SECTION May 18, 2012 Plumbing Insulation Revision 0 22 07 00 - 5
Page 1 and 2:
BIDDING DOCUMENTS for the Ward Coun
Page 3 and 4:
Advertisement for Bids
Page 5 and 6:
these qualifications will be disqua
Page 7 and 8:
00 10 00 INSTRUCTIONS TO BIDDERS 1.
Page 9 and 10:
6. Substitutions or "equivalent" It
Page 11 and 12:
B. In evaluating Bids, Owner / Engi
Page 13 and 14:
Bid Proposal Form
Page 15 and 16:
Colorado River Municipal Water Dist
Page 17 and 18:
Bid Package Colorado River Municipa
Page 19 and 20:
Page 21 and 22:
1. Legal / Financial Colorado River
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 42 and 43:
Performance Bond (sample)
Page 44 and 45:
Payment Bond (sample)
Page 46 and 47:
Certificate of Insurance (sample)
Page 48 and 49:
Standard General Conditions
Page 50 and 51:
Copyright ©1996 National Society o
Page 52 and 53:
6.07 Patent Fees and Royalties ....
Page 54 and 55:
GENERAL CONDITIONS ARTICLE 1 - DEFI
Page 56 and 57:
Act of 1954 (42 USC Section 2011 et
Page 58 and 59:
A. CONTRACTOR’s Review of Contrac
Page 60 and 61:
from retaining copies of the Contra
Page 62 and 63:
CONTRACTOR shall be responsible for
Page 64 and 65:
maintain. OWNER shall deliver to CO
Page 66 and 67:
directors, partners, employees, age
Page 68 and 69:
y words reading that no like, equiv
Page 70 and 71:
perils or causes of loss covered by
Page 72 and 73:
maintaining and supervising of safe
Page 74 and 75:
1. IS ATTRIBUTABLE TO BODILY INJURY
Page 76 and 77:
ARTICLE 9 - ENGINEER’S STATUS DUR
Page 78 and 79:
that should be allowed as a result
Page 80 and 81:
TRACTOR is liable, imposed by Laws
Page 82 and 83:
c. where one or more tiers of subco
Page 84 and 85:
equipment, or fails to perform the
Page 86 and 87:
a. the Work has progressed to the p
Page 88 and 89:
certification of Substantial Comple
Page 90 and 91:
labor, materials, or equipment as r
Page 92 and 93:
Supplementary Conditions (Revised b
Page 94 and 95:
G. Add a new paragraph 1.01 A. 53:
Page 96 and 97:
A. Delete Paragraph 2.05 A. of the
Page 98 and 99:
3. Make copies of reference standar
Page 100 and 101:
obligations of Bidder under these b
Page 102 and 103:
underground coverage where applicab
Page 104 and 105:
7. be maintained in effect until fi
Page 106 and 107:
B. Add a new paragraph immediately
Page 108 and 109:
(b) a new certificate of coverage s
Page 110 and 111:
SC‐6.18 G. In the event that Bidd
Page 112 and 113:
uncovered for observation, or requi
Page 114 and 115:
3. Shall not undertake any of the r
Page 116 and 117:
unable to agree as to the effect of
Page 118 and 119:
A. Add the following to paragraph 1
Page 120 and 121:
01 11 00 SUMMARY OF WORK 1.00 GENER
Page 122 and 123:
shall install the SCADA equipment a
Page 124 and 125:
Payment Procedures
Page 126 and 127:
) Provide amounts for items that do
Page 128 and 129:
3. On the basis of these agreements
Page 130 and 131:
01 31 00 PROJECT MANAGEMENT AND COO
Page 132 and 133:
E. Coordinate with architectural re
Page 134 and 135:
Restore structures which may have b
Page 136 and 137:
D. Assume full responsibility for t
Page 138 and 139:
B. Conduct all construction activit
Page 140 and 141:
C. Owner, CMAR or Engineer may use
Page 142 and 143:
Project Coordination
Page 144 and 145:
a. Preliminary construction schedul
Page 146 and 147:
1.08 REQUESTS FOR MODIFICATIONS A.
Page 148 and 149:
2) Horizontal and vertical location
Page 150 and 151:
01 32 16 CONSTRUCTION PROGRESS SCHE
Page 152 and 153:
1.05 FLOAT TIME A. Define float tim
Page 154 and 155:
Submittal Procedures
Page 156 and 157:
adequate time for the submittal rev
Page 158 and 159:
2. Define abbreviations and symbols
Page 160 and 161:
c. Dimensions or other data that do
Page 162 and 163:
C. Include the amount if cost savin
Page 164 and 165:
1.11 RESUBMISSION REQUIREMENTS A. M
Page 166 and 167:
01 40 00 QUALITY REQUIRMENTS 1.00 G
Page 168 and 169:
5. Do not affect the continuing rig
Page 170 and 171:
B. Payment for non‐conforming Wor
Page 172 and 173:
2. Changes are made in applicable q
Page 174 and 175:
c. Provide corporation cocks at lea
Page 176 and 177:
24 1360 100 13.676 (L) 27 1530 88 1
Page 178 and 179:
Complete appropriate test report ne
Page 180 and 181:
h. Energize switchgear. Measure and
Page 182 and 183:
4.03 TOLERANCES A. Monitor fabricat
Page 184 and 185:
I. Agency Reports: After each test,
Page 186 and 187:
01 50 00 TEMPORARY FACILITIES AND C
Page 188 and 189:
D. Work outside the hours or 7:00 a
Page 190 and 191:
01 57 00 TEMPORARY CONTROLS 1.00 GE
Page 192 and 193:
B. Use forms required by the Texas
Page 194 and 195:
C. Remove temporary control when no
Page 196 and 197:
01 60 00 PRODUCT REQUIREMENTS 1.00
Page 198 and 199:
C. Two or more items of the same ki
Page 200 and 201:
A. Provide suitable anchor bolts fo
Page 202 and 203:
01 70 00 EXECUTION AND CLOSEOUT REQ
Page 204 and 205:
1.07 FINAL APPLICATION FOR PAYMENT
Page 206 and 207:
Final Cleaning
Page 208 and 209:
D. Clean wall surfaces to remove di
Page 210 and 211:
01 75 00 STARTING AND ADJUSTING 1.0
Page 212 and 213:
D. Unless specifically stated other
Page 214 and 215:
3.06 INITIAL MAINTENANCE A. Maintai
Page 216 and 217:
01 78 23 OPERATION AND MAINTENANCE
Page 218 and 219:
B. Include only the information tha
Page 220:
Appendix A Contract Documents for R
Page 223 and 224: Raw Water Supply Well Sites Ward Co
Page 225 and 226: Division 03
Page 227 and 228: Colorado River Municipal Water Dist
Page 255 and 256: Specification Section 11 97 00, Att
Page 257 and 258: S:\Projects\CRMWD\WR11.0143_CRMWD_W
Page 271: Colorado River Municipal Water Dist
Page 283 and 284: PROJECT: OWNER: CONTRACTOR: ENGINEE
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Division 31
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Division 32
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Division 40
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Appendix A
Page 413 and 414:
Electric Service Guidelines July 20
Page 415 and 416:
ELECTRIC SERVICE GUIDELINES These E
Page 417 and 418:
FOREWORD Page 4 SECTION 100 GENERAL
Page 419 and 420:
FOREWORD This booklet is issued by
Page 421 and 422:
SECTION 100 - GENERAL INFORMATION 1
Page 423 and 424:
100.01.22 Service Agreement Any com
Page 425 and 426:
100.02.03 Inspection and Approval o
Page 427 and 428:
100.05.02 Standard Secondary Voltag
Page 429 and 430:
SECTION 200 - CLEARANCES 200.01 Tex
Page 431 and 432:
CLEARANCE OF SWIMMING POOLS FROM OV
Page 433 and 434:
CLEARANCES OF PADMOUNTED TRANSFORME
Page 435 and 436:
SECTION 300 - OVERHEAD SERVICE 300.
Page 437 and 438:
TYPICAL PERMANENT SERVICE DROP FIGU
Page 439 and 440:
MAXIMUM SERVICE DROP LENGTH FOR RES
Page 441 and 442:
NOTES: OVERHEAD SERVICE TO A PERMAN
Page 443 and 444:
OVERHEAD SERVICE TO TWO OR THREE ME
Page 445 and 446:
OVERHEAD THREE WIRE DELTA SERVICES
Page 447 and 448:
400.03 Underground Services to Seco
Page 449 and 450:
UNDERGROUND SERVICE SELF CONTAINED
Page 451 and 452:
UNDERGROUND SERVICE ONE SECONDARY S
Page 453 and 454:
UNDERGROUND SERVICE, TWO OR MORE SE
Page 455 and 456:
SECTION 500 - METERING AND ASSOCIAT
Page 457 and 458:
500.06.03 Meterpacks Meterpacks for
Page 459 and 460:
500.08 Service Enclosures (Distribu
Page 461 and 462:
COMPANY - CUSTOMER RESPONSIBILITY (
Page 463 and 464:
47 APPLICATION WIRES PHASE VOLTS 3
Page 465 and 466:
49 APPLICATION WIRES PHASE VOLTS ME
Page 467 and 468:
TRANSOCKET CONFIGURATIONS AND CONNE
Page 469 and 470:
TRANSOCKET CONFIGURATIONS AND CONNE
Page 471 and 472:
TYPICAL SERVICE ENCLOSURES (CONTINU
Page 473 and 474:
METER SOCKET CONNECTIONS AND VOLTAG
Page 475 and 476:
Page 477 and 478:
Page 479 and 480:
TEMPORARY SERVICE POLE FROM OVERHEA
Page 481 and 482:
TWO HOLE COMPRESSION LUGS FOR TERMI
Page 483 and 484:
TWO HOLE COMPRESSION LUGS FOR TERMI
Page 485 and 486:
ONE HOLE COMPRESSION LUGS FOR SUBME
Page 487 and 488:
Information to be Supplied by Elect
Page 489 and 490:
DO YOU KNOW THE LAW? Texas Law & OS
Page 491 and 492:
Appendix B
Page 493 and 494:
40 90 00 INSTRUMENTATION AND CONTRO
Page 495 and 496:
1.03 GUARANTEE 12. Underwriters' La
Page 497 and 498:
4. Electrical and interconnection d
Page 499 and 500:
B. Use test equipment and instrumen
Page 501 and 502:
1 40 90 02 SUPERVISORY CONTROL AND
Page 503 and 504:
C. System Components: The system wi
Page 505 and 506:
. ICS 1.1, Safety Guidelines for th
Page 507 and 508:
C. Post-submittal Sample Screens fo
Page 509 and 510:
1.03 QUALITY ASSURANCE A. Suppliers
Page 511 and 512:
1.06 WARRANTY 5. Two (2) spare PLC
Page 513 and 514:
J. Utilize a power turn-on time del
Page 515 and 516:
6) High CPU temperature 7) Scan tim
Page 517 and 518:
4. Analog I/O Modules: a. Input mod
Page 519 and 520:
2.06 SURGE SUPPRESSOR A. Surge supp
Page 521 and 522:
7. Wiring shall be run enclosed in
Page 523 and 524:
2.10 UNINTERRUPTIBLE POWER SUPPLY (
Page 525 and 526:
2.14 GIGABIT ETHERNET 3-PORT SWITCH
Page 527 and 528:
3.04 TESTS A. All elements of the S
Page 529 and 530:
a) For analog devices: Required and
Page 531 and 532:
3. Evening meetings to review the d
Page 533 and 534:
3.08 FUNCTIONAL DEMONSTRATION TEST
Page 535 and 536:
3.10 TRAINING A. Provide an integra
Page 537 and 538:
Page 540:
This page intentionally left blank.
Page 559 and 560:
Appendix B Project Manual for Verti
Page 561 and 562:
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Copyright © 2010: National Society
Page 569 and 570:
AGREEMENT THIS AGREEMENT is by and
Page 571 and 572:
ARTICLE 7 - PAYMENT PROCEDURES 7.01
Page 573 and 574:
1. This Agreement (pages 00520-1 to
Page 575 and 576:
1) Engineer will review Seller’s
Page 578 and 579:
RESOLUTION VERTICLE TURBINE SUBMERS
Page 581:
Page 585:
Page 599:
CONFLICT OF INTEREST QUESTIONNAIRE
Page 602 and 603:
Service Information: The areas wher
Page 605:
Page 619 and 620:
Copyright © 2010: National Society
Page 621 and 622:
ARTICLE 8 - BUYER’S RIGHTS.......
Page 623 and 624:
10. Claim—A demand or assertion b
Page 625 and 626:
1.02 Terminology 35. Supplementary
Page 627 and 628:
B. The progress schedule will be ac
Page 629 and 630:
3.04 Amending and Clarifying Contra
Page 631 and 632:
B. All Goods, and all equipment and
Page 633 and 634:
C. Submittal Procedures: 1. Before
Page 635 and 636:
3. use of the Goods by Buyer; 4. an
Page 637 and 638:
for the Goods. Seller shall also re
Page 639 and 640:
tests of the Goods at Seller’s fa
Page 641 and 642:
D. Buyer’s Acceptance of Non-Conf
Page 643 and 644:
C. If Engineer does not render a fo
Page 645 and 646:
10.04 Suspension of or Reduction in
Page 647 and 648:
11.04 Breach and Termination A. Buy
Page 649 and 650:
12.03 Buyer’s Infringement A. Buy
Page 651 and 652:
of the firm or to an officer of the
Page 653 and 654:
of an offense directly or indirectl
Page 655 and 656:
e. Excess or Umbrella Liability 1)
Page 657 and 658:
separately identified item of Unit
Page 659 and 660:
F. The award will be consistent wit
Page 661 and 662:
BID ADDENDUM FAILURE TO RETURN THIS
Page 663 and 664:
Page 666 and 667:
Daniel B. Stephens & Associates, In
Page 668 and 669:
Daniel B. Stephens & Associates, In
Page 670 and 671:
Technical Specifications
Page 673 and 674:
Page 675 and 676:
Page 677 and 678:
SECTION 01019 CONTRACT CONSIDERATIO
Page 679 and 680:
Page 681 and 682:
Page 683 and 684:
Page 685 and 686:
Page 687 and 688:
Page 689 and 690:
Page 691 and 692:
Page 693 and 694:
Page 695 and 696:
Page 697 and 698:
Page 699 and 700:
Page 701 and 702:
Page 703 and 704:
Page 705 and 706:
Page 707 and 708:
Page 709 and 710:
Page 711 and 712:
Page 713 and 714:
show all

Bid Package 08 North Well Field - Garney Construction

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?