Bid Package 08 North Well Field - Garney Construction

D. Unless specifically stated otherwise in the individual equipment specifications, equipment
and systems are not substantially complete until the end of this initial operation period. If
an exception to this requirement is specifically noted in an individual equipment
specification, the exception shall only apply to that particular piece of equipment and not to
the remaining components provided under the project.
3.05 OPERATOR TRAINING
A. Provide instruction and demonstration of the care and operation of the equipment to the
Owner's personnel. Instruction is to include classroom and hands-on training.
B. Provide training in adequate detail to ensure that the trainees who complete the program
will be qualified and capable of operating and maintaining the equipment, products, and
systems provided.
C. Operations Training is to include but not be limited to:
1. Orientation to provide an overview of system/subsystem configuration and operation
2. Terminology, nomenclature, and display symbols.
3. Operations theory.
4. Equipment appearance, functions, concepts, and operation.
5. Operating modes, practices and procedures under normal, diminished, and emergency
conditions.
6. Start-up and shutdown procedures.
7. Safety Precautions.
8. On-the-job operating experience for monitoring functions, supervisory, or command
activities. Include functions and activities associated with diminished operating modes,
failure recognition, and responses to system/subsystem and recovery procedures.
9. Content and use of Operation and Maintenance manuals and related reference
materials.
D. Provide training for performing on-site routine, preventive, and remedial maintenance of
the equipment, product, or system. Maintenance training is to include but not be limited
to:
1. Orientation to provide an overview of system/subsystem concept, configuration, and
operation.
2. Operations theory and interfaces.
3. Instructions necessary to ensure a basic theoretical and practical understanding of
equipment appearance, layout and functions.
4. Safety precautions.
5. Use of standard and special tools and test equipment.
6. Adjustment, calibration, and use of related test equipment.
7. Detailed preventive maintenance activities.
8. Troubleshooting, diagnostics, and testing.
9. Equipment assembly and disassembly.
10. Repair and parts replacement.
11. Parts ordering practices and storage.
12. Failure and recovery procedures.
13. Cabling and/or interface connectors.
Starting and Adjusting – Bid Package #8 01 75 00-3
Colorado River Municipal Water District
Ward County Water Supply Expansion Project – North Well Field
5/24/2012