Bid Package 08 North Well Field - Garney Construction

1.03 SUBMITTALS
Bidder assumes all costs necessary to incorporate the item and the CMAR/Engineer
approves such revisions.
3. Coordinate electrical requirements for the products to be installed in the project,
including revisions in electrical equipment components wiring and other factors
necessary to incorporate the component.
A. Provide Submittals in accordance with Section 01 33 00, Submittal Procedures, and shall
include:
1.04 STANDARDS
1. Certificates of Adequacy of Design, as described in Section 01 33 00, Submittal
Procedures;
2. Equipment Installation Reports per Section 01 75 00, Starting and Adjusting;
3. Other documentation as required by detailed equipment specifications.
A. The applicable industry standards referenced in Specifications shall apply as if written here
in its entirety.
B. Except where otherwise indicated, structural and miscellaneous fabricated steel used in
items of equipment shall conform to the Standards of the American Institute of Steel
Construction.
1.05 GUARANTEES AND WARRANTIES
A. Guarantee and or Warranty products furnished by the Bidder under this contract against:
1. Faulty or inadequate design,
2. Improper assembly or erection,
3. Defective workmanship or materials,
4. Leakage, breakage, or other failure.
B. Guarantee and or Warranty the products installed under this contract, including products
furnished by the Owner, against leakage, breakage, or other failure due to improper
assembly or erection and against improper installation of the equipment. The guarantee
and or warranty period shall be as defined in the General Conditions. Individual specification
sections may have more stringent warranty requirements than stated in the General
Conditions The most stringent warranty will be required in the event of any difference in the
two aforementioned locations.
2.00 PRODUCTS
2.01 MATERIALS
A. Design, fabricate, assemble, deliver and install according to normally accepted engineering
and shop practices, except where a higher standard of quality is required by the Contract
Documents.
B. Manufacture like parts of duplicate units to standard sizes and gages. Like parts are to be
interchangeable.
Product Requirement – Bid Package #8 01 60 00-2
Colorado River Municipal Water District
Ward County Water Supply Expansion Project – North Well Field
5/24/2012