MMC2107 - Freescale Semiconductor

Chip Configuration Module (CCM)
Freescale Semiconductor, Inc.
3.8.6 Internal FLASH Configuration
During reset configuration, the D28 pin controls whether or not the
internal FLASH is enabled or disabled as shown in Table 3-13.
Table 3-13. Internal FLASH Configuration (1)
Internal FLASH Configuration
Internal FLASH enabled
D28 pin driven high
External D28 State
nc...
Freescale Semiconductor, I
3.9 Reset
3.10 Interrupts
Internal FLASH disabled
D28 pin driven low
1. Modifying the default configurations is possible only if the external RCON pin is asserted
low.
Reset initializes CCM registers to a known startup state as described in
3.7 Memory Map and Registers. The CCM controls chip configuration
at reset as described in 3.8 Functional Description.
The CCM does not generate interrupt requests.
Technical Data MMC2107 – Rev. 2.0
106 Chip Configuration Module (CCM) MOTOROLA
For More Information On This Product,
Go to: www.freescale.com