MMC2107 - Freescale Semiconductor

Timer Modules (TIM1 and TIM2)
Freescale Semiconductor, Inc.
15.6 Signal Description
Table 15-1 provides an overview of the signal properties.
Table 15-1. Signal Properties
Name (1)
Port Function Reset State Pullup
ICOC0 TIMPORT0 Channel 0 IC/OC pin Pin state Active
ICOC1 TIMPORT1 Timer channel 1 IC/OC pin Pin state Active
ICOC2 TIMPORT2 Timer channel 2 IC/OC pin Pin state Active
nc...
Freescale Semiconductor, I
15.6.1 ICOC[2:0]
15.6.2 ICOC3
15.7 Memory Map and Registers
ICOC3 TIMPORT3 Timer channel 3 IC/OC or PA pin Pin state Active
1. Pin signal names may change according to user requirements.
The ICOC[2:0] pins are for channel 2–0 input capture and output
compare functions. These pins are available for general-purpose
input/output (I/O) when not configured for timer functions.
The ICOC3 pin is for channel 3 input capture and output compare
functions or for the pulse accumulator input. This pin is available for
general-purpose I/O when not configured for timer functions.
See Table 15-2 for a memory map of the two timer modules. Timer 1 has
a base address of 0x00ce_0000. Timer 2 has a base address of
0x00cf_0000.
NOTE:
Reading reserved or unimplemented locations returns 0s. Writing to
reserved or unimplemented locations has no effect.
Technical Data MMC2107 – Rev. 2.0
298 Timer Modules (TIM1 and TIM2) MOTOROLA
For More Information On This Product,
Go to: www.freescale.com