MMC2107 - Freescale Semiconductor

Freescale Semiconductor, Inc.
Serial Communications Interface Modules (SCI1 and SCI2)
NOTE:
If the value of T8 is the same as in the previous transmission, T8 does
not have to be rewritten. The same value is transmitted until T8 is
rewritten.
When using the 8-bit data format, only SCIDRL needs to be accessed.
When using 8-bit write instructions to transmit 9-bit data, write first to
SCIDRH, then to SCIDRL.
16.7.7 SCI Pullup and Reduced Drive Register
nc...
Freescale Semiconductor, I
Address: SCI1 — 0x00cc_0008
SCI2 — 0x00cd_0008
Read:
Write:
Write: Anytime
Bit 7 6 5 4 3 2 1 Bit 0
SCISDOZ
0
RSVD5
RDPSCI
0 0
SCISDOZ — SCI Stop in Doze Mode Bit
The SCISDOZ bit disables the SCI in doze mode.
1 = SCI disabled in doze mode
0 = SCI enabled in doze mode
RSVD1
Reset: 0 0 0 0 0 0 0 0
RSVD[5:1] — Reserved
Writing to these read/write bits updates their values but has no effect
on functionality.
RDPSCI — Reduced Drive Bit
This read/write bit controls the drive capability of TXD and RXD.
1 = Reduced TXD and RXD pin drive
0 = Full TXD and RXD pin drive
PUPSCI
= Writes have no effect and the access terminates without a transfer error exception.
Figure 16-10. SCI Pullup and Reduced Drive Register (SCIPURD)
Technical Data MMC2107 – Rev. 2.0
346 Serial Communications Interface Modules (SCI1 and SCI2) MOTOROLA
For More Information On This Product,
Go to: www.freescale.com