MMC2107 - Freescale Semiconductor

Signal Description
Freescale Semiconductor, Inc.
4.5.3.8 Address Bus (A[22:0])
These output signals provide the address for the current bus transfer.
4.5.3.9 Enable Byte (EB[3:0])
These output signals indicate which byte of data is valid during external
cycles.
4.5.3.10 Chip Select (CS[3:0])
nc...
Freescale Semiconductor, I
4.5.3.11 Output Enable (OE)
4.5.4 Edge Port Signals
4.5.4.1 External Interrupts (INT[7:6])
4.5.4.2 External Interrupts (INT[5:2])
These output signals select external devices for external bus
transactions.
This output signal indicates when an external device can drive data
during external read cycles.
These signals are used by the edge port module.
These bidirectional signals function as either external interrupt sources
or GPIO. Also, these signals may be used to reflect the internal TSIZ[1:0]
signals and externally to provide an indication of the M•CORE transfer
size.
These bidirectional signals function as either external interrupt sources
or GPIO. Also, these signals may be used to reflect the internal
PSTAT[3:0] signals and externally to provide an indication of the
M•CORE processor status.
Technical Data MMC2107 – Rev. 2.0
124 Signal Description MOTOROLA
For More Information On This Product,
Go to: www.freescale.com