MMC2107 - Freescale Semiconductor

Freescale Semiconductor, Inc.
Interrupt Controller Module
Memory Map and Registers
7.7.2 Registers
This subsection contains a description of the interrupt controller module
registers.
7.7.2.1 Interrupt Control Register
nc...
Freescale Semiconductor, I
The 16-bit interrupt control register (ICR) selects whether interrupt
requests are autovectored or vectored, and if vectored, whether fast
interrupts generate a different vector number than normal interrupts.
This register also controls the masking functions.
Address: 0x00c5_0000 and 0x00c5_0001
Read:
Write:
Bit 15 14 13 12 11 10 9 Bit 8
AE FVE ME MFI
0 0 0 0
Reset: 1 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 Bit 0
Read: 0 0 0
Write:
MASK4 MASK3 MASK2 MASK1 MASK0
Reset: 0 0 0 0 0 0 0 0
= Writes have no effect and the access terminates without a transfer error exception.
Figure 7-2. Interrupt Control Register (ICR)
AE — Autovector Enable Bit
The read/write AE bit enables autovectored interrupt requests. Reset
sets AE.
1 = Autovectored interrupt requests
0 = Vectored interrupt requests
FVE — Fast Vector Enable Bit
The read/write FVE bit enables fast vectored interrupt requests to
have vector numbers separate from normal vectored interrupt
requests. Reset clears FVE.
1 = Unique vector numbers for fast vectored interrupt requests
0 = Same vector number for fast and normal vectored interrupt
requests
MMC2107 – Rev. 2.0
Technical Data
MOTOROLA Interrupt Controller Module 157
For More Information On This Product,
Go to: www.freescale.com