MMC2107 - Freescale Semiconductor

Freescale Semiconductor, Inc.
Reset Controller Module
Memory Map and Registers
EXT — External Reset Flag
EXT indicates that the last reset was caused by an external device
asserting the external RESET pin.
1 = Last reset state caused by external device asserting the
external RESET pin
0 = No external reset
nc...
Freescale Semiconductor, I
5.6.3 Reset Test Register
LOC — Loss of Clock Reset Flag
LOC indicates that the last reset state was caused by a loss of clock
detected by the loss of clock circuit.
1 = Last reset caused by loss of clock
0 = No loss of clock reset
LOL — Loss of Lock Reset Flag
LOL indicates that the last reset state was caused by a loss of lock
detected by the PLL circuit.
1 = Last reset caused by loss of lock
0 = No loss of lock
The reset test register (RTR) is used only for factory testing.
This register is read-only when not in test mode.
Address: 0x000c4_0002
Bit 7 6 5 4 3 2 1 Bit 0
Read: 0 0 0 0 0 0 0 0
Write:
Reset: 0 0 0 0 0 0 0 0
= Writes have no effect and the access terminates without a transfer error exception.
Figure 5-4. Reset Test Register (RTR)
MMC2107 – Rev. 2.0
Technical Data
MOTOROLA Reset Controller Module 135
For More Information On This Product,
Go to: www.freescale.com