MMC2107 - Freescale Semiconductor

Freescale Semiconductor, Inc.
Reset Controller Module
Memory Map and Registers
5.6.1 Reset Control Register
The reset control register (RCR) allows software control for requesting a
reset or for independently asserting the external RSTOUT pin. RCR is
read/write always.
Address: 0x000c4_0000
Bit 7 6 5 4 3 2 1 Bit 0
nc...
Freescale Semiconductor, I
CAUTION:
Read:
Write:
SOFTRST
FRC-
RSTOUT
0 0 0 0 0 0
Reset: 0 0 0 0 0 0 0 0
= Writes have no effect and the access terminates without a transfer error exception.
Figure 5-2. Reset Control Register (RCR)
SOFTRST — Software Reset Request Bit
The SOFTRST bit allows software to request a reset. Note that the
reset caused by setting this bit clears this bit.
1 = Request software reset
0 = No software reset request
FRCRSTOUT — Force RSTOUT Pin Bit
The FRCRSTOUT bit allows software to assert or negate the external
RSTOUT pin.
1 = Assert the RSTOUT pin.
0 = Do not assert the RSTOUT pin.
External logic driving reset configuration data during reset needs to be
considered when asserting the RSTOUT pin when setting
FRCRSTOUT.
MMC2107 – Rev. 2.0
Technical Data
MOTOROLA Reset Controller Module 133
For More Information On This Product,
Go to: www.freescale.com