Bravo & Brava • 1995 To 2000

12*8 Body electrical systems
5.6a Prise out the covers ... 5.6b ... then undo the screws ... 5.6c ... lower the courtesy light...
5 Fit the new bulb using a reversal of the
removal procedure, but make sure that it is
5.6d ... and disconnect the wiring
5.7 Remove the bulb cover
held firmly between the spring contacts. If
necessary, bend the contacts.
Front courtesy light
(models with a sunroof)
6 Using a screwdriver, carefully prise out the
screw head covers from the courtesy light.
Undo the screws and slide the light unit down
towards the windscreen. Disconnect the
wiring and remove the light unit (see
illustrations).
7 Extract the sunroof key, then push the tab
and remove the bulb cover (see illustration).
8 Extract the bulb from the spring contacts
(see illustrations).
9 Fit the new bulb using a reversal of the
removal procedure, but make sure that it is
5.8a ... then use a screwdriver to release
the bulb from its contacts ...
held firmly between the spring contacts. If
necessary, bend the contacts.
Rear courtesy light
10 Using a screwdriver, carefully prise the
light unit from the headlining (see
illustration).
11 Extract the bulb from the spring contacts
(see illustration).
12 Fit the new bulb using a reversal of the
removal procedure, but make sure that it is
held firmly between the spring contacts. If
necessary, bend the contacts.
Luggage compartment light
13 Using a screwdriver, carefully prise the
light unit from the loadspace side trim and let
it hang by the wiring (see illustration).
5.8b ... and withdraw the festoon-type
bulb