Fast Models Reference Manual - ARM Information Center

Processor Components
4.13.3 Parameters
Table 4-39 provides a description of the configuration parameters for the ARM1176CT
component.
Table 4-39 ARM1176CT parameters
Parameter Description Type Values Default
BIGENDINIT
CP15SDISABLE
INITRAM
UBITINIT
VINITHI
initialize to ARMv5 big endian
mode
initialize to disable access to
some CP15 registers
initialize with ITCM0 enabled at
address 0x0
initialize to ARMv6 unaligned
behavior
initialize with high vectors
enabled
boolean true/false false
boolean true/false false
boolean true/false false
boolean true/false false
boolean true/false false
itcm0_size Size of ITCM in KB. integer 0x00 - 0x40 0x10
dtcm0_size Size of DTCM in KB. integer 0x00 - 0x40 0x10
device-accurate-tlb
Specify whether all TLBs are
modeled.
boolean true/false false a
semihosting-cmd_line b
command line available to
semihosting SVC calls
string
no limit
except
memory
[empty
string]
semihosting-debug c
semihosting-enable
enable debug output of
semihosting SVC calls
Enable semihosting SVC traps.
Caution
Applications that do not use
semihosting must set this
parameter to false.
boolean true/false false
boolean true/false true
semihosting-ARM_SVC
semihosting-Thumb_SVC
ARM SVC number for
semihosting
Thumb SVC number for
semihosting
integer uint24_t 0x123456
integer uint8_t 0xAB
semihosting-heap_base virtual address of heap base integer 0x00000000 -
0xFFFFFFFF
semihosting-heap_limit virtual address of top of heap integer 0x00000000 -
0xFFFFFFFF
0x0
0x0F000000
semihosting-stack_base
virtual address of base of
descending stack
integer 0x00000000 -
0xFFFFFFFF
0x10000000
ARM DUI 0423J Copyright © 2008-2011 ARM. All rights reserved. 4-73
ID051811
Non-Confidential