Fast Models Reference Manual - ARM Information Center

Peripheral and Interface Components
Registers
The PL350_SMC_NAND_FLASH component has no registers.
Debug features
The PL350_SMC_NAND_FLASH component has no debug features.
Verification and testing
The PL350_SMC_NAND_FLASH component has been tested as part of an integrated platform.
Performance
The PL350_SMC_NAND_FLASH component is not expected to significantly affect the
performance of a PV system.
Library dependencies
The PL350_SMC_NAND_FLASH component has no dependencies on external libraries.
5.4.25 PL390_GIC component
The PL390 is a Generic Interrupt Controller (GIC) which implements the ARM Generic
Interrupt Controller Architecture. The component is based on r0p0 of the PL390 Interrupt
Controller.
The GIC provides support for three interrupt types:
• Software Generated Interrupt (SGI)
• Private Peripheral Interrupt (PPI)
• Shared Peripheral Interrupt (SPI).
Interrupts are programmable so that the following can be set:
• security state for an interrupt
• priority state for an interrupt
• enabling or disabling state for an interrupt
• processors that receive an interrupt.
For a detailed description of the behavior of the PL390 Interrupt Controller, refer to the
component documentation. See ARM PrimeCell Generic Interrupt Controller (PL390)
Technical Reference Manual and the Generic Interrupt Controller Architecture Specification.
Figure 5-39 on page 5-83 shows a view of the component in System Canvas.
ARM DUI 0423J Copyright © 2008-2011 ARM. All rights reserved. 5-101
ID051811
Non-Confidential