Fast Models Reference Manual - ARM Information Center

Peripheral and Interface Components
Parameters
The SGValue2AMBAPVValue64 component has no configuration parameters.
Registers
The SGValue2AMBAPVValue64 component has no registers.
Debug features
The SGValue2AMBAPVValue64 component has no debug features.
Verification and testing
The SGValue2AMBAPVValue64 component has been tested as part of the SystemC Export
example systems. These systems can be found in %PVLIB_HOME%\examples\SystemCExport. On
Linux, look in the $PVLIB_HOME/examples/SystemCExport directory.
Performance
The SGValue2AMBAPVValue64 component is not expected to significantly affect the
performance of a PV system.
Library dependencies
The SGValue2AMBAPVValue64 component has no dependencies on external libraries.
5.3.11 AMBAPVValue2SGValue component
The AMBAPVValue2SGValue component converts from AMBAPVValue to Value protocols,
using 32 bit integer values between components.
Figure 5-15 shows a view of the component in System Canvas.
This component is written in LISA.
Figure 5-15 AMBAPVValue2SGValue in System Canvas
Ports
Table 5-19 lists the ports in the AMBAPVValue2SGValue component.
Table 5-19 AMBAPVValue2SGValue component ports
Name Port protocol Type Description
amba_pv_value_s AMBAPVValue Slave Input slave port for connection from
top-level AMBAPVValue slave port.
sg_value_m Value Master Handles outgoing value changes.
Converted value changes are sent out
through this port.
ARM DUI 0423J Copyright © 2008-2011 ARM. All rights reserved. 5-31
ID051811
Non-Confidential