29.11.2014 Views

Fast Models Reference Manual - ARM Information Center

Fast Models Reference Manual - ARM Information Center

Fast Models Reference Manual - ARM Information Center

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Emulation Baseboard Model: Platform and Components<br />

7.8 Other Emulation Baseboard components<br />

This section briefly describes the purpose of selected additional components included with the<br />

Emulation Baseboard platform model.<br />

7.8.1 EBConnector and EBSocket components<br />

The EBConnector and EBSocket components are used to forward Interrupts, CLK and PVBus<br />

transactions between the EBBaseboard and the Core Tile. As their names indicate, the two<br />

components emulate the connections in a Core Tile to the Emulation Baseboard.<br />

7.8.2 EBInterruptForwarder component<br />

The EBInterruptForwarder component is an assistant component for EBSocket.<br />

EBInterruptForwarder receives all interrupts and is responsible for telling the socket which<br />

interrupt happened.<br />

7.8.3 EBRemapper component<br />

The EBRemapper component is a control component involved with remapping logic on the<br />

Emulation Baseboard. The component receives the remap_clear signal from the<br />

SP810_SysCtrl component and boot_switch value from the EB_SysReg component to<br />

determine which devices are to be remapped and unremapped. The EB_SysReg component is<br />

described elsewhere in this document. See EB_SysRegs component on page 7-13. The<br />

SP810_SysCtrl component is described in Chapter 5 Peripheral and Interface Components.<br />

<strong>ARM</strong> DUI 0423J Copyright © 2008-2011 <strong>ARM</strong>. All rights reserved. 7-22<br />

ID051811<br />

Non-Confidential

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!