Fast Models Reference Manual - ARM Information Center

Emulation Baseboard Model: Platform and Components
7.7 TSC2200 component
The TSC2200 component is a programmer's view model of the EB baseboard touchscreen
interface. This component is based on a TSC2200 PDA analog interface circuit, which is
provided as standard on the EB baseboard. For a detailed description of the behavior of the
component, refer to the hardware documentation. See the RealView Emulation Baseboard User
Guide (Lead Free).
Figure 7-6 shows a view of the component in System Canvas.
This component is written in LISA+.
Figure 7-6 TSC2200 in System Canvas
7.7.1 Ports
Table 7-13 provides a brief description of the TSC2200 component ports. Refer to the hardware
documentation for more details.
Name Port Protocol Type Description
DAV Signal master Indicates if data available.
Table 7-13 TSC2200 ports
lcd_layout LCDLayoutInfo slave Sets the initial horizontal and vertical
size of the touchscreen.
MISO Value slave Serial data output to PL022
Synchronous Serial Port (SSP) device.
MOSI Value master Serial data input from PL022 SSP
device.
PENIRQ Signal master Sends IRQ signal to the host if the pen is
down.
touch_screen MouseStatus slave Provides pointer position and pen status.
7.7.2 Additional protocols
The TSC2200 component has one additional protocol.
LCDLayoutInfo
The LCDLayoutInfo protocol has the following behavior:
setLayoutInfo determines the width and height of the touchscreen.
ARM DUI 0423J Copyright © 2008-2011 ARM. All rights reserved. 7-20
ID051811
Non-Confidential