Fast Models Reference Manual - ARM Information Center

Peripheral and Interface Components
Performance
The AMBAPVSignal2SGSignal component is not expected to significantly affect the
performance of a PV system.
Library dependencies
The AMBAPVSignal2SGSignal component has no dependencies on external libraries.
5.3.7 SGStateSignal2AMBAPVSignalState component
The SGStateSignal2AMBAPVSignalState component converts from StateSignal to
AMBAPVSignalState protocols.
Figure 5-11 shows a view of the component in System Canvas.
This component is written in LISA.
Figure 5-11 SGStateSignal2AMBAPVSignalState in System Canvas
Ports
Table 5-15 describes the SGStateSignal2AMBAPVSignalState ports.
Table 5-15 SGStateSignal2AMBAPVSignalState ports
Name Port protocol Type Description
sg_signal_s Signal Slave Handles incoming signal state changes.
amba_pv_signal_m
AMBAPVSignal
State
Master
Output master port for connection to
top-level AMBAPVSignal master port.
Converted signal state changes are sent
out through this port.
Additional protocols
The SGStateSignal2AMBAPVSignalState component has no additional protocols.
Parameters
The SGStateSignal2AMBAPVSignalState component has no configuration parameters.
Registers
The SGStateSignal2AMBAPVSignalState component has no registers.
Debug features
The SGStateSignal2AMBAPVSignalState component has no debug features.
ARM DUI 0423J Copyright © 2008-2011 ARM. All rights reserved. 5-27
ID051811
Non-Confidential