Fast Models Reference Manual - ARM Information Center

Emulation Baseboard Model: Platform and Components
d. The implementation of the PL180 is currently limited, so not all features are present.
e. See Differences between the EB hardware and the system model on page 7-23.
f. The Cortex -A9 models implement an internal GIC. This is mapped at 0x1F000000 - 0x1F001FFF.
g. The EB RTSM GICs are not the same as those implemented on the EB hardware as the register map is different. See Generic
Interrupt Controller on page 7-24.
h. Although the EB hardware uses the PL093 static memory controller, the model implements PL350. These are functionally
equivalent.
i. This peripheral is implemented in the IntelStrataFlashJ3 component in the EB RTSM.
j. This peripheral is implemented in the SC91C111 component in the EB RTSM.
Note
The EB RTSMs implementation of memory does not require programming the memory
controller with the correct values. This means you must ensure that the memory controller is set
up properly if run an application on actual hardware. If this is not done, applications that run on
a RTSM might fail on actual hardware.
ARM DUI 0423J Copyright © 2008-2011 ARM. All rights reserved. 7-5
ID051811
Non-Confidential