Fast Models Reference Manual - ARM Information Center

Microcontroller Prototyping System: Platform and Components
8.3.3 Parameters
Table 8-10 provides a description of the configuration parameters for the MPSVisualisation
component.
Table 8-10 MPSVisualisation configuration parameters
Parameter name Description Type Allowed value
Default
value
trap_key
trap key that works with left
Ctrl key to toggle mouse
pointer display
integer
valid
ATKeyCode
key value a
107 b
rate_limit-enable rate limit simulation boolean true/false true
disable-visualisation enable/disable visualisation boolean true/false false
a. See the header file, %PVLIB_HOME%\components\KeyCode.h, for a list of ATKeyCode values. On Linux use
$PVLIB_HOME/components/KeyCode.h.
b. This is equivalent to the left Windows key.
8.3.4 Registers
The MPSVisualisation component has no registers.
8.3.5 Debug features
The MPSVisualisation component has no debug features.
8.3.6 Verification and testing
The MPSVisualisation component has been tested as part of the MPS example system using
MPS test suites.
8.3.7 Performance
Applications that make heavy use of re-drawing the contents of the frame buffer may incur
overhead through GUI interactions on the host OS.
8.3.8 Library dependencies
The MPSVisualisation component relies on the Simple DirectMedia Layer (SDL) libraries,
specifically libSDL-1.2.so.0.11.2. This library is bundled with the Model Library and is also
available as a rpm for Red Hat Enterprise Linux. See http://www.libsdl.org/ for more
information on SDL.
ARM DUI 0423J Copyright © 2008-2011 ARM. All rights reserved. 8-10
ID051811
Non-Confidential