Fast Models Reference Manual - ARM Information Center

Peripheral and Interface Components
This component is written in LISA+.
Ports
Table 5-77 provides a brief description of the PL350_SMC_NAND_FLASH component ports.
Refer to the static memory controller documentation for more details.
Name Port protocol Type Description
Table 5-77 PL350_SMC_NAND_FLASH ports
pvbus PVBus Slave Slave port for connection to PV bus
master/decoder
irq Signal Master Interrupt signaling
device PVDevice Slave Port used to define device behavior
Additional protocols
The PL350_SMC_NAND_FLASH component has no additional protocols.
Parameters
Table 5-78 provides a description of the configuration parameters for the
PL350_SMC_NAND_FLASH component.
Table 5-78 PL350_SMC_NAND_FLASH configuration parameters
Parameter name Description Type
Allowed
value
Default value
DEVICE_NAME
Name of the
device
String - “Samsung
K9F1G08U0M”
DEVICE_1
DEVICE_2
DEVICE_3
DEVICE_4
The device ID Integer - default(0xEC)
default(0xDA)
default(0x80)
default(0x15)
NAND_FLASH_SIZE
Size of the flash
device in bytes
Integer - 0x1080000
NAND_PAGE_SIZE Page size Integer 0x2112 or
0x528
0x2112
NAND_SPARE_SIZE_PER_PAGE Extra bits Integer 64 or 16 64
NAND_VALID_SIZE_PER_PAGE Valid page size Integer - 2048
NAND_PAGE_COUNT_PER_BLOCK
NAND_BLOCK_COUNT
Number of
pages in each
block
Number of
blocks in the
flash device
Integer - 64
Integer - 2048
ARM DUI 0423J Copyright © 2008-2011 ARM. All rights reserved. 5-100
ID051811
Non-Confidential