Fast Models Reference Manual - ARM Information Center

Emulation Baseboard Model: Platform and Components
Name Port Protocol Type Description
boot_switch ValueState master provides state for the eight Boot DIP
switches on the right side of the CLCD
status bar, equivalent to switch S8 on EB
hardware
leds ValueState master displays state of the SYS_LED register
using the eight colored LEDs on the
status bar
user_switches ValueState master provides state for the eight User DIP
switches on the left side of the CLCD
status bar, equivalent to switch S6 on EB
hardware.
a. See EBRemapper component on page 7-22.
Table 7-8 EB_SysRegs ports (continued)
7.5.2 Additional protocols
The EB_SysRegs component has no additional protocols.
7.5.3 Parameters
Table 7-9 provides a description of the configuration parameters for the EB_SysRegs
component.
Table 7-9 EB_SysRegs configuration parameters
Parameter name Description Type
Allowed
value
Default
value
boot_switches_Value boot select switch integer as switch S8
on EB
hardware a
0
clcdid color LCD ID integer - 0x1
proc_id_tile_site1
proc_id_tile_site2
sys_id
processor ID
register
processor ID
register
system
identification
register
integer - 0x04000000
integer - 0x04000000
integer - 0x01400400
tile1 tile 1 fitted boolean true/false true
tile2 tile 2 fitted boolean true/false false
user_switches_value user switches integer as switch S6 0
on EB
hardware a
a. Full details on switch values and their effects are provided elsewhere. See the RealView
Development Suite Real-Time System Models User Guide. See also the RealView Emulation
Baseboard User Guide (Lead Free).
ARM DUI 0423J Copyright © 2008-2011 ARM. All rights reserved. 7-14
ID051811
Non-Confidential