Fast Models Reference Manual - ARM Information Center

Peripheral and Interface Components
Verification and testing
The SGStateSignal2AMBAPVSignalState component has been tested as part of the SystemC
Export example systems. These systems can be found in %PVLIB_HOME%\examples\SystemCExport.
On Linux, look in the $PVLIB_HOME/examples/SystemCExport directory.
Performance
The SGStateSignal2AMBAPVSignalState component is not expected to significantly affect the
performance of a PV system.
Library dependencies
The SGStateSignal2AMBAPVSignalState component has no dependencies on external
libraries.
5.3.8 AMBAPVSignalState2SGStateSignal component
The AMBAPVSignalState2SGStateSignal component converts from AMBAPVSignalState to
StateSignal protocols.
Figure 5-12 shows a view of the component in System Canvas.
This component is written in LISA.
Figure 5-12 AMBAPVSignalState2SGStateSignal in System Canvas
Ports
Table 5-16 lists the ports in the AMBAPVSignalState2SGStateSignal component.
Table 5-16 AMBAPVSignalState2SGStateSignal component ports
Name Port protocol Type Description
amba_pv_signal_s
AMBAPVSignal
State
Slave
Input slave port for connection from
top-level AMBAPVSignal slave port.
sg_signal_m StateSignal Master Handles outgoing signal state changes.
Converted signal state changes are sent
out through this port.
Additional protocols
The AMBAPVSignalState2SGStateSignal component has no additional protocols.
Parameters
The AMBAPVSignalState2SGStateSignal component has no configuration parameters.
Registers
The AMBAPVSignalState2SGStateSignal component has no registers.
ARM DUI 0423J Copyright © 2008-2011 ARM. All rights reserved. 5-28
ID051811
Non-Confidential