Fast Models Reference Manual - ARM Information Center

Peripheral and Interface Components
Debug features
The AMBAPVSignalState2SGStateSignal component has no debug features.
Verification and testing
The AMBAPVSignalState2SGStateSignal component has been tested as part of the SystemC
Export example systems. These systems can be found in %PVLIB_HOME%\examples\SystemCExport.
On Linux, look in the $PVLIB_HOME/examples/SystemCExport directory.
Performance
The AMBAPVSignalState2SGStateSignal component is not expected to significantly affect the
performance of a PV system.
Library dependencies
The AMBAPVSignalState2SGStateSignal component has no dependencies on external
libraries.
5.3.9 SGValue2AMBAPVValue component
The SGValue2AMBAPVValue component converts from Value to AMBAPVValue protocols,
using 32 bit integer values between components.
Figure 5-13 shows a view of the component in System Canvas.
This component is written in LISA.
Figure 5-13 SGValue2AMBAPVValue in System Canvas
Ports
Table 5-17 lists the SGValue2AMBAPVValue ports.
Name Port protocol Type Description
Table 5-17 SGValue2AMBAPVValue ports
sg_value_s Value Slave Handles incoming value changes.
amba_pv_value_m AMBAPVValue Master Output master port for connection to
top-level AMBAPVValue master port.
Converted value changes are sent out
through this port.
Additional protocols
The SGValue2AMBAPVValue component has no additional protocols.
Parameters
The SGValue2AMBAPVValue component has no configuration parameters.
ARM DUI 0423J Copyright © 2008-2011 ARM. All rights reserved. 5-29
ID051811
Non-Confidential