Fast Models Reference Manual - ARM Information Center

Peripheral and Interface Components
Library dependencies
The SGSignal2AMBAPVSignal component has no dependencies on external libraries.
5.3.6 AMBAPVSignal2SGSignal component
The AMBAPVSignal2SGSignal component converts from AMBAPVSignal to Signal
protocols.
Figure 5-10 shows a view of the component in System Canvas.
This component is written in LISA.
Figure 5-10 AMBAPVSignal2SGSignal in System Canvas
Ports
Table 5-14 provides a description of the ports in the AMBAPVSignal2SGSignal component.
Table 5-14 AMBAPVSignal2SGSignal component ports
Name Port protocol Type Description
amba_pv_signal_s AMBAPVSignal Slave Input slave port for connection from
top-level AMBAPVSignal slave port.
sg_signal_m Signal Master Handles outgoing signal state changes.
Converted signal state changes are sent
out through this port.
Additional protocols
The AMBAPVSignal2SGSignal component has no additional protocols.
Parameters
The AMBAPVSignal2SGSignal component has no configuration parameters.
Registers
The AMBAPVSignal2SGSignal component has no registers.
Debug features
The AMBAPVSignal2SGSignal component has no debug features.
Verification and testing
The AMBAPVSignal2SGSignal component has been tested as part of the SystemC Export
example systems. These systems can be found in %PVLIB_HOME%\examples\SystemCExport. On
Linux, look in the $PVLIB_HOME/examples/SystemCExport directory.
ARM DUI 0423J Copyright © 2008-2011 ARM. All rights reserved. 5-26
ID051811
Non-Confidential