29.11.2014 Views

Fast Models Reference Manual - ARM Information Center

Fast Models Reference Manual - ARM Information Center

Fast Models Reference Manual - ARM Information Center

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Emulation Baseboard Model: Platform and Components<br />

7.9 Differences between the EB hardware and the system model<br />

The following sections describe features of the Emulation Baseboard hardware that are not<br />

implemented in the models or have significant differences in implementation:<br />

• Features not present in the model<br />

• Remapping and DRAM aliasing on page 7-24<br />

• Dynamic memory characteristics on page 7-24<br />

• Status and system control registers on page 7-24<br />

• Generic Interrupt Controller on page 7-24<br />

• GPIO2 on page 7-25<br />

• Timing considerations on page 7-25.<br />

7.9.1 Features not present in the model<br />

The following features present on the hardware version of the Emulation Baseboard are not<br />

implemented in the system models:<br />

• two wire serial bus interface<br />

• character LCD interface<br />

• smart card interface<br />

• PCI controller configuration registers<br />

• debug access port<br />

• disk on chip<br />

• configuration flash<br />

• USB<br />

• PISMO expansion memory<br />

• PCI interface bus windows<br />

• UART Modem handshake signals<br />

• VGA support.<br />

Note<br />

For more information on memory-mapped peripherals, see Emulation Baseboard memory map<br />

on page 7-3.<br />

The following features present on the hardware version of the Emulation Baseboard are only<br />

partially implemented in the Real-Time System <strong>Models</strong>:<br />

• Sound<br />

• Dynamic memory controller.<br />

Partial implementation means that some of the components are present but the functionality has<br />

not been fully modeled. If you use these features, they might not work as you expect. Check the<br />

model release notes for the latest information.<br />

Sound<br />

The EB RTSMs implement the PL041 AACI PrimeCell and the audio CODEC as in the EB<br />

hardware, but with a limited number of sample rates.<br />

Dynamic memory controller<br />

The dynamic memory controller, though modeled in the EB RTSMs, does not provide direct<br />

memory access to all peripherals. Only the audio and synchronous serial port interface<br />

components can be accessed through the DMC.<br />

<strong>ARM</strong> DUI 0423J Copyright © 2008-2011 <strong>ARM</strong>. All rights reserved. 7-23<br />

ID051811<br />

Non-Confidential

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!