22.01.2014 Views

Azura-Edo Independent Power Plant Environmental Impact ... - IFC

Azura-Edo Independent Power Plant Environmental Impact ... - IFC

Azura-Edo Independent Power Plant Environmental Impact ... - IFC

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

During operation, the major solid waste stream will be waste chemicals from<br />

the demineralisation plant and office waste including paper cardboard, glass,<br />

food wastes and cans. It is anticipated that small amounts of hazardous waste<br />

will be generated in the form of fuel oil residues, cleaning solvents and sludge<br />

from oil tanks.<br />

All solid wastes generated will be disposed of at an appropriately licensed<br />

landfill site. <strong>Azura</strong> <strong>Power</strong> will identify appropriate landfill sites during the<br />

detailed design phase.<br />

3.3 UTILITIES AND ANCILLARY SERVICES<br />

3.3.1 Electrical Systems and Transmission Line<br />

The transmission line (330 kV) will link the power plant to the Benin North<br />

Substation that is being built adjacent to the Site. The transmission line will be<br />

placed aboveground and require one pylon. Details of the additional electrical<br />

systems are described under Section 3.2.6.<br />

3.3.2 Gas Pipeline Spur<br />

The gas pipeline spur will be constructed (by the gas supplier) along the<br />

cleared existing right of way for the spur constructed for the neighbouring<br />

NIPP plant to the ELPS line. This right of way runs for 1 km along the<br />

southern boundary of the NIPP site to the ELPS pipeline. A separate spur line<br />

comprising a 1 km 18 inch pipe will be buried parallel to the existing line used<br />

for the NIPP plant and will be for the sole use of the Project.<br />

The gas supplier may also consider a route which runs a maximum of 50 m<br />

directly from the eastern corner of the Project site to the ELPS line Error!<br />

Reference source not found..<br />

3.3.3 Workshop/ Store Building<br />

A workshop/ store building will be located adjacent to the administration<br />

buildings and close to the car park (see Figure 3.1). The workshop will contain<br />

the following:<br />

• work areas with equipment eg welding unit, lathe, grinder and drilling<br />

machine;<br />

• storage areas for engine tools and spare parts;<br />

• an electrical instrument workshop;<br />

• a laboratory; and<br />

• male and female toilets, washing facilities and changing rooms.<br />

AZURA EDO IPP<br />

3-15<br />

DRAFT EIA REPORT

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!