Specs

Bridgestone Retail Operations, LLC
City:
State:
P.I.N. No.
PROJECT MANUAL
Version: January 2012
{00052658.DOC;1}
SECTION 01001
STANDARD GENERAL CONDITIONS – MULTI-DRAW CONTRACT
1. CONTRACT DOCUMENTS AND INTERPRETATION.
A. Contract Documents. The term “Contract Documents” shall have the meaning set forth in Section 1 of
the Agreement.
B. Interpretation. The Contract Documents are cumulative, and what is called for by any one shall be as
binding as if called for by all. In the event of a conflict or inconsistency between any of the provisions of the
Contract Documents, the provision granting greater rights or remedies to Owner, as determined by Owner, or
imposing the greater duty, standard, responsibility or obligation on the Contractor, as determined by Owner, shall
govern and control. All capitalized terms used in the Contract Documents shall have the meanings ascribed to them
in the Agreement or these Standard General Conditions, unless the context clearly requires a different meaning.
C. Ownership of the Plans. Unless otherwise provided in the Contract Documents, the number of copies of
the Plans reasonably necessary for the execution of the Work (as hereinafter defined) will be furnished to Contractor
by Owner, at Contractor’s expense, and shall be returned to Owner upon completion of the Work, as they remain
Owner’s property.
D. Tenders. Owner reserves the right to accept or reject any or all bids or any parts thereof.
2. WORK.
A. Defined. Contractor shall, at its sole cost and expense, provide, perform, and complete, in the manner
specified and described, and upon the terms and conditions set forth, in the Contract Documents, all of the
following, all of which is herein referred to as the “Work”:
i. Labor, Equipment, Materials and Supplies. Provide, perform, and complete, in the manner
specified and described in the Contract Documents, all necessary work, labor, services, transportation, equipment,
materials, supplies, information, data, and other means and items necessary to perform the project described in the
Contract Documents at the location described in the Agreement to which these Standard General Conditions are
attached;
ii. Permits. Procure and furnish all permits, licenses, and other governmental approvals and authorizations
necessary in connection with the Work (“Permits and Approvals”);
iii. Bonds and Insurance. Procure and furnish all bonds and all insurance certificates specified in the
Contract Documents;
iv. Taxes. Pay all applicable Federal, State, County, or Municipal excise, gross receipts, sales, or other taxes,
any payroll taxes or assessments, contributions for unemployment insurance, social security taxes, pensions or
annuities which are measured by the wages, salaries or other remunerations paid to the employees of Contractor;
v. Miscellaneous. Do all other things required of Contractor by the Contract Documents; and
vi. Quality. Provide, perform, and complete all of the foregoing in a proper and workmanlike manner,
consistent with highest standards of professional and construction practices, in full compliance with, and as required
by or pursuant to, the Contract Documents, and with the greatest economy, efficiency, and expedition consistent
therewith, with only new, undamaged, and first quality equipment, materials, and supplies.
B. Authorization for Work. Contractor shall do no Work without written authorization to proceed from
Owner. No changes shall be made in the Work without written approval from Owner pursuant to Section 13 of
these Standard General Conditions.
3. TIME AND SCHEDULE.
STANDARD GENERAL CONDITIONS – MULTI-DRAW CONTRACT 01001 - Page 1 of 23