Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
SECTION 15542
GAS-FIRED RADIANT HEATERS
PART 1 - GENERAL
1.01 SUMMARY
A. This Section includes gas-fired tubular infrared radiant heaters with straight or “U” tube
configurations.
1.02 SUBMITTALS
A. Product Data: For each type of gas-fired radiant heater indicated. Include rated capacities,
operating characteristics, and accessories.
B. Shop Drawings: Detail equipment assemblies and indicate dimensions, weights, loads, required
clearances, method of field assembly, components, and location and size of each field
connection.
C. Wiring Diagrams: Power control wiring.
D. Field quality-control test reports.
E. Operation and maintenance data.
1.03 QUALITY ASSURANCE
A. Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70,
Article 100, by a testing agency acceptable to authorities having jurisdiction, and marked for
intended use.
1.04 WARRANTY
A. Heaters shall be design certified by the Canadian Standards Association (CSA) to American
National Standard Z83.20/CSA2.34. The manufacturer shall provide a written limited warranty
covering the heavy one-piece cast iron burner for a period of ten (10) years, the emitter tube for
a period of five (5) years, and all components utilized in the heater's control assembly for a period
of one (1) year.
PART 2 - PRODUCTS
2.01 U-TUBE RADIANT HEATERS
A. Basis-of-Design Product: Subject to compliance with requirements, provide the product indicated
on Drawings or a comparable product by one of the following:
1. Gas-Fired Products Inc.; Space-Ray Div.
2. Roberts-Gordon, Inc.
3. Solaronics, Inc.
4. Detroit Radiant Products; Re-Verber-Ray.
GAS-FIRED RADIANT HEATERS 15542 - Page 1 of 4