10.03.2015 Views

Specs

Specs

Specs

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Bridgestone Retail Operations, LLC<br />

PROJECT MANUAL<br />

Version: January 2012<br />

B. Install lockers level and plumb with flush surfaces and rigid attachment to anchoring surfaces.<br />

C. Anchor lockers to floor and wall at 48 inches or less, as recommended by the manufacturer.<br />

D. Bolt adjoining locker units together to provide rigid installation.<br />

E. Install sloping tops and metal fillers using concealed fasteners. Provide flush hairline joints against<br />

adjacent surfaces.<br />

F. Install front bases between legs without overlap or exposed fasteners. Provide end bases on<br />

exposed ends.<br />

3.03 ADJUSTING AND CLEANING<br />

A. Adjust doors and latches to operate without binding. Verify that latches are operating<br />

satisfactorily.<br />

B. Touch-up with factory-supplied paint and repair or replace damaged products before<br />

Substantial Completion.<br />

3.04 PROTECTION<br />

A. Protect installed products until completion of project.<br />

END OF SECTION<br />

METAL LOCKERS 10513 - Page 3 of 3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!