Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
If approved by the Zone Construction Manager, the testing engineer shall verify the adequacy of the
welds in question by means of ultrasonic inspection
d. Inspect steel roof deck for compliance with Drawings and Specifications. Report on the
following:
• Select 6 random sheets for each type of deck used and inspect for deck thickness, type and
material.
• Inspect 10 percent of deck welds/connections over the entire roof area for size and spacing
(CWI to perform inspection).
• Inspect 10 percent of side lap connectors over the entire roof area for type, size and
spacing for side al connectors.
END OF SECTION
QUALITY REQUIREMENTS 01400 - Page 11 of 11