Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
2.02 FABRICATION
a. No additional requirements.
PART 3 EXECUTION
3.01 PROTECTION
a. Safety Codes and Standards: The Contractor shall be solely responsible for performing
the work in a safe and workmanlike manner. The Contractor shall be responsible for
familiarizing himself with and complying with all safety requirements of the governing
authorities having jurisdiction.
b. Existing Utilities: Locate existing utilities underground by careful excavation before
starting earthwork operations. If utilities are to remain in place, provide protection from
damage during construction operations. Should uncharted or incorrectly charted piping
or other utilities be encountered during excavation, consult the Architect immediately for
directions as to procedure. Cooperate with Owner and public and private utility
companies in keeping services and facilities in operation. Repair damaged utilities to
satisfaction of utility owner.
i. Do not interrupt existing utilities serving facilities occupied and used by the
Owner or others, except when permitted in writing by Architect and then only
after temporary utility services have been provided.
c. Use of Explosives: Do not bring explosives onto site or use in work without the prior
written permission of Architect. Contractor is solely responsible for the handling, storage,
and use of explosive materials when their use is permitted.
d. Protection of Persons and Property:
3.02 EXCAVATION
i. Barricade open excavations and post with warning lights as required for the
safety of persons. Protect structures, utilities sidewalks, pavements, and other
facilities immediately adjacent to excavations from damages caused by
settlement, lateral movement, undermining, washout and other hazards.
ii. Take precautions and provide necessary bracing and shoring to guard against
movement or settlement of existing improvements or new construction.
Contractor is entirely responsible for strength and adequacy of bracing and
shoring, and for safety and support of construction from damage or injury caused
by lack thereof or by movement or settlement.
a. Excavation consists of the removal and disposal of all material encountered to obtain
required elevations. Excavations shall be made to proper depth, with allowances made
for clearances to install services and forms. Cuts shall be accurately shaped to crosssections
and grades indicated.
EARTHWORK 02200 – Page 2 of 5