Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
SECTION 16510
INTERIOR LUMINARIES
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Interior luminaries and accessories.
1.02 QUALITY ASSURANCE
Products: Listed and classified by Underwriters Laboratories, Inc. as suitable for the purpose.
PART 2 PRODUCTS
2.01 LUMINAIRES
Furnish products as indicated in drawing fixture schedule.
2.02 LAMPS
Lamp Types: Acceptable Manufacturers: GE, Phillips, Sylvania.
PART 3 EXECUTION
3.01 INSTALLATION
A. Install suspended luminaries and exit signs using pendants supported from swivel hangers.
Provide pendant length required to suspend luminaire at indicated height.
B. Support luminaries larger than 2 x 4 foot size independent of ceiling framing.
C. Locate recessed ceiling luminaries as indicated on reflected ceiling plan.
D. Install surface mounted luminaries and exit signs plumb and adjust to align with building lines and
with each other. Secure to prevent movement.
E. Exposed Grid Ceilings: Support surface mounted luminaries in grid ceiling directly from building
structure.
F. Install recessed luminaries to permit removal from below.
G. Install recessed luminaries using accessories and firestopping materials to meet regulatory
requirements for fire rating.
H. Install clips to secure recessed grid-supported luminaries in place.
I. Install wall mounted luminaries, emergency lighting units, and exit signs at height as indicated on
Drawings.
J. Install specified lamps in each emergency lighting unit, exit sign, and luminaire.
3.02 FIELD QUALITY CONTROL
A. Operate each luminaire after installation and connection. Inspect for proper connection and
operation.
3.03 ADJUSTING
A. Aim and adjust luminaries as indicated.
B. Position exit sign directional arrows as indicated.
3.04 PROTECTION
A. Relamp luminaries that have failed lamps at Substantial Completion.
END OF SECTION
INTERIOR LUMINARIES 16510 - Page 1 of 1