Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
SECTION 09245
STUCCO
PART 1 GENERAL
1.01 SUMMARY
A. Section Includes:
1. Metal lath and accessories.
2. Pre-mix three coat stucco.
B. Related Work:
1. Section 07900 - Joint Sealers.
1.02 SUBMITTALS
A. Product data for each product specified.
1.03 DELIVERY, STORAGE, AND HANDLING
A. Deliver cementitious materials to Project site in original packages, containers, or bundles,
labeled with manufacturer's name, product brand name, and lot number.
B. Store materials inside, under cover, and dry, protected from weather, direct sunlight, surface
contamination, aging, corrosion, and damage from construction traffic and other causes.
1.04 PROJECT CONDITIONS
A. Comply with requirements of referenced stucco application standards and recommendations
of stucco manufacturer for environmental conditions before, during, and after stucco
application.
B. Warm-Weather Requirements: Protect stucco against uneven and excessive evaporation
and from strong flows of dry air. Apply and cure stucco as required by climatic and job
conditions to prevent dryout during cure period. Provide suitable coverings, moist curing,
and barriers to deflect sunlight and wind as required.
C. Cold-Weather Requirements: Do not apply stucco when ambient temperature is below
40 degrees F.
D. Provide temporary covering and other provisions necessary to minimize harmful spattering
of stucco on other work.
PART 2 PRODUCTS
2.01 MANUFACTURERS
A. Metal Lath:
1. Cemco Metal Lath Products.
2. Dietrich Industries, Inc., Colton, CA (909) 824-9717
3. United States Gypsum Company, Glendale, CA (800) 974-4874.
STUCCO 09245 - Page 1 of 4