Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
SECTION 02482
HYDROMULCHING NEW LAWNS
PART 1 GENERAL:
1.01 CONDITIONS AND MATERIALS:
A. The Contractor will visit the site to examine the conditions, as they exist, determine the
nature of the materials to be used, and all other facts pertinent to the work.
1.02 PROTECTION:
A. Loss or damage of hydromulching, whether by theft, vandalism, fire, flood, lightning,
storms, freezes, insects, disease, etc., rests solely with the Contractor until final
acceptance by Owner.
1.03 DELIVERY:
A. Hydromulching material shall be delivered to the site only after the berms are prepared
and are ready for planting.
1.04 DAMAGES:
A. Any areas damaged through landscape operations pertaining to this contract will be
fully restored to their original condition.
PART 2 PRODUCTS
2.01 SUPPLIES:
A. The Contractor will supply all tools, hoses, and other equipment for performance of
specified maintenance. The Contractor at his expense shall furnish hose and other
watering equipment required for the work.
B. This cost will be included in the bid proposal.
2.02 HYDROMULCHING-BERMUDA GRASS SEED:
A. Quantities: 2 pounds per 1,000 square feet.
2.03 WOOD CELLULOSE FIBER:
2.04 MULCH:
A. Quantities: 50 pounds per 1,000 square feet.
A. Use mulch with tackifier on all berms indicated on the landscape plan, at the rate of 1
1/2 pounds of Fiber Tack, per 1,000 square feet.
B. Apply the mulch, taking extreme care not to spray the material outside the lawn areas,
by using a 4'x8'bafter board along all bed and concrete areas.
HYDROMULCHING NEW LAWNS 02482 – Page 1 of 2