Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
(ii) To pay each Subcontractor a just share of any fire and extended coverage insurance money received by the
Contractor;
(iii) The Contractor shall be responsible for all actions, inactions, and omissions of Subcontractors, and lower
tier Subcontractors, suppliers, and their agents, employees, and any other person employed or performing
portions of the Work under a contract with the Contractor or a party to a contract between the Contractor
and any Subcontractor or Sub-subcontractor or supplier; and
(iv) Nothing contained in the Contract Documents shall be deemed to create any contractual relationship
between the Owner and any Subcontractor or Sub-subcontractor or any other party than the Owner and the
Contractor; provided, however, Owner shall be a third party beneficiary of the subcontracts as provided
above.
E. Each subcontract agreement for a portion of the Work shall be assigned by the Contractor to the Owner
provided that:
(i) Assignment is effective only after termination of the Contract by the Owner for cause pursuant to the
Contract and only for those subcontract agreements that the Owner accepts by notifying the Subcontractor
in writing; and
(ii) Assignment is subject to the prior rights of the surety, if any, obligated under a bond relating to the
Contract.
F. The Contractor shall provide the Owner with a copy of all executed subcontract agreements prior to any
Subcontractor beginning performance of the Work. Contractor shall execute all subcontract agreements in
accordance with all applicable Laws.
29. PLANS. While the plans may be subdivided into trades (for the district purpose of facilitating the Work)
Contractor will be held to furnish all labor and materials necessary to completely perform the Work as contemplated
by the Plans.
Contractor understands and agrees that the Work herein described shall be complete in every detail,
notwithstanding every item necessarily involved is not particularly mentioned, and Contractor will be held to
provide all labor and materials necessary for the entire completion of the Work intended, and shall not avail himself
of any manifestly unintentional error or omission should such exist. Should any error, omission, or inconsistency
appear in the Plans, it shall be the duty of Contractor, before proceeding with the Work, to advise Owner’s
Representative in writing of same, and in no case shall Contractor proceed with the Work until such error, omission
or inconsistency has been corrected.
Unless otherwise provided in the Contract Documents, Owner will furnish to Contractor, free of charge, all copies of
Plans reasonable necessary for the execution of the Work. They are not to be used on other work, and all copies,
with the exception of the signed contract set of the Plans, are to be returned to Owner on request at completion of the
Work.
30. CONTINUOUS OPERATION OF PREMISES. Owner may at its option commence or continue
operations on the Premises and to this end Contractor shall cooperate with Owner’s Representative with respect to
performance of the Work. If necessary to avoid interference with Owner’s operations, the Work shall be done
during hours to suit Owner’s convenience and without additional cost to Owner.
Owner’s commencement or continuance of operations, including without limitation fixturing or opening the
Premises to the general public, shall not in any way diminish Contractor’s obligations under the Contract
Documents.
31. MEASUREMENTS, FITTING OF PARTS, CUTTING, PATCHING AND DIGGING. Contractor
without extra charge shall make such slight alterations, cutting, fitting or patching of the Work as may be necessary
to make adjustable parts fit to fixed parts, leaving all complete and in proper shape when done. Contractor shall not
{00052658.DOC;1}
STANDARD GENERAL CONDITIONS – MULTI-DRAW CONTRACT 01001 - Page 18 of 23