Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
2.05 FERTILIZER:
A. Shall be (13-13-13) at 2lbs per l,000 square feet.
PART 3 EXECUTION
3.01 LAWN PREPARATION:
A. Tilling and Grading:
1. Areas that have become hardened and non-porous because of construction
activities, shall be loosened by rototilling, disking, harrowing, or any
approved method.
2. All areas to receive seed will be hand and machine raked and graded after
tilling. Remove all large lumps of clay, debris, stones, etc., before
hydromulching.
3.02 LANDSCAPE MAINTENANCE:
A. After hydromulching, maintain the lawn area and keep constantly moist until the seed
has germinated and the grass begins to spread. After this, water the grass less
frequently but more thoroughly at each watering.
B. The Contractor will be responsible for watering and necessary maintenance of all
installed materials until final acceptance by the Owner. Maintenance will include:
1. Weeding.
2. Mowing.
3. Edging grass.
4. Watering.
C. Water will be available on the site at no expense to the Contractor.
3.03 CLEANUP:
A. All areas are to be kept as neat and clean as possible during the installation process.
All trash and debris generated will be removed from the project daily.
B. Final clean up will include removal of all landscape debris from the site. All walks and
curbs will be broomed cleaned, unless otherwise directed by the Owner.
END OF SECTION
HYDROMULCHING NEW LAWNS 02482 – Page 2 of 2