Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
SECTION 10445
DOOR AND ROOM SIGNS
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Door Signs.
B. Room Signs.
1.02 REFERENCES
A. ATBCB ADAAG - Americans with Disabilities Act Accessibility Guidelines; US Architectural and
Transportation Barriers Compliance Board.
B. Local and state ordinances that modify or replace federal guidelines.
1.03 SUBMITTALS
A. Sustainable Submittals: No submittals are required. Refer to Section 01352 for Sustainable
recommendations on this project.
1.04 QUALITY ASSURANCE
A. Regulatory Requirements: Sign types to comply with ADAAG requirements, or local jurisdiction
having authority.
PART 2 PRODUCTS
2.01 MANUFACTURERS
A. Acceptable Manufacturers:
1. ASI Group (BSRO Vendor), (901) 312-6195.
2. Or equal.
2.02 SIGNS
A. Acrylic Graphic Braille Signs:
1. Acceptable product: Seton Series M54xx.
2. Colors: Selected by Owner's Representative from manufacturer's full range of available
colors.
3. Sign size: 8 by 8 inches.
4. Graphics: International symbols for indicated information.
5. Lettering: 5/8 inch high, raised 1/32 inch, with Number 2 Braille coding.
6. Sign frames: Manufacturer's standard.
B. Accessibility Signs:
1. Colors: To be selected.
2. Sign size: 8 by 8 inches.
3. Graphics: International symbols for indicated information.
C. Accessories: Installation accessories specified in manufacturer's instructions.
D. Refer to drawings for locations.
PART 3 EXECUTION
3.01 INSTALLATION
A. Install room and door signs in accordance with manufacturer's printed installation instructions.
B. Locate signs in accordance with approved shop drawings and ADAAG requirements.
END OF SECTION
DOOR AND ROOM SIGNS 10445 - Page 1 of 1