Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
SECTION 15010
SUPPLEMENTARY MECHANICAL CONDITIONS
PART 1 GENERAL
1.01 GENERAL AND SUPPLEMENTARY GENERAL CONDITIONS: Shall be made a part of this section.
The Contractor shall read all sections of the specifications in order to thoroughly understand the nature
of the entire project, the requirements for coordination among the several trades, and items in other
sections which apply to the mechanical work.
1.02 SCOPE OF WORK : Furnish all labor, materials, services, equipment and appliances required for the
complete furnishing and installation of the mechanical systems.
1.03 RELATED WORK SPECIFIED ELSEWHERE:
A. Finish painting unless specified otherwise in another section: Refer to Section: PAINTING.
B. Electrical Work: Refer to Section: ELECTRICAL.
1.04 UTILITIES, LOCATIONS AND ELEVATIONS:
A. Locations and elevations of the various utilities, included within the scope of this contract, have
been obtained from as-built plans and/or other substantially reliable sources and are offered
separate from the contract documents as a general guide only, without guarantee as to accuracy.
The Contractor shall examine the site and shall verify to his own satisfaction the locations and
elevations of all utilities and shall adequately inform himself of their relation to his work.
B. The Contractor shall arrange and pay for connections to the various utilities as indicated, as well
as provide for all meters, meter settings, pads, pits, and covers required by the Utility Company.
1.05 PERMITS AND APPROVALS:
A. All work done under this contract shall comply with all local and state codes having jurisdiction
and with the requirements of the Utility Companies whose services may be used. All
modifications required by these codes shall be made by the Contractor without additional charge.
Where code requirements are less than those shown on the plans or in the specifications, the
plans and specifications shall be followed.
B. The Contractor shall obtain all permits, inspections and approvals as required by all authorities
having jurisdiction. All fees and costs of any nature whatsoever incidental to these permits,
inspections and approvals must be assumed and paid by the Contractor.
1.06 SHOP DRAWINGS:
A. Shop drawings of fully descriptive catalog data shall be submitted by the Contractor for all items
of material and equipment furnished and installed under this contract. The Contractor shall
submit to the Architect a sufficient number of copies of all such shop drawings or catalog data to
provide him with as many reviewed copies as he may need; plus two (2) copies for retention by
the Architect and Engineer.
B. Before submitting shop drawings to the Architect for review, the Contractor shall examine them
and satisfy himself that they are correctly representative of the material or equipment to which
they pertain. The Contractor shall so note on these drawings before submitting them. The
Contractor's review of the shop drawings is not intended to take the place of the official review by
the Architect, and shop drawings which have not been reviewed by Architect shall not be used in
fabricating or installing any work.
SUPPLEMENTARY MECHANICAL CONDITIONS 15010 - Page 1 of 4