Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
F. CODES
1. Contractor shall submit his base bid in accordance with Drawings and Specifications. If
Drawings and Specifications do not comply with any codes or utility company requirements
having jurisdiction, then Contractor shall submit an alternate price on any changes
necessary to comply with such codes. If such alternates are not stated in bid, it shall be
assumed that Contractor's base bid includes all work necessary to comply with such codes
or utility company regulations. No extras shall be paid for any work required for complying
with such codes or for replacing work and materials in order to meet requirements of codes
or utility company regulations having jurisdiction.
2. If Drawings and Specifications call for an installation with requirements in excess of the
minimum code requirements, the installation shall be made strictly in accordance with the
Drawings and Specifications.
G. INSPECTION OF WORK
1. Contractor shall provide and keep on job a safety helmet for use of authorized
representatives.
2. In the event the specifications, laws, ordinances, or any public authority requires any part of
work or materials to be specially tested or installation specially supervised, such testing and
supervision shall be at Contractor's expense. Owner shall be notified in writing of time, date
and place fixed for such testing and supervision.
H. CONTRACTOR
1. Attention is called to the Contractor that he shall provide a competent superintendent and
any necessary assistants (all satisfactory to owner) in order to provide strict supervision over
all Subcontractors. He shall familiarize himself with those portions of the Specifications and
Drawings pertaining to the Subcontractors. The Contractor shall see that each of the
Subcontractors under this Contract fully and faithfully completes all work in strict accordance
with the provisions as set forth in the Drawings and Specifications as they pertain to those
Subcontractors. General Contractor shall be held responsible for the failure of any of his
Subcontractors to complete all the work in accordance with the Drawings and Specifications.
2. Should the Contractor object to methods or materials specified, he shall notify Owner in
writing and have same adjusted before proceeding with the work. Procedure without notice
shall be construed as full acceptance of the Drawings and Specifications.
I. SUBCONTRACTS
1. General Contractor shall be held responsible for all material or labor furnished by
Subcontractors. Owner reserves the right to accept or reject any Subcontractors and
Contractor shall obtain Owner's approval before letting any Subcontracts or placing orders
for materials.
2. Subcontractor certification shall be required for hoist and “Firestone Rubber guard” roof
installations.
J. COOPERATION WITH OTHER CONTRACTORS
1. Contractor shall collaborate with any Subcontractor for building of recess, openings, etc. or
leaving holes as required by other Contractors. If proper notice and instructions are not given
to Contractor prior to the erection of such work, Subcontractor shall then employ Contractor
to do the work required for them at Subcontractor's expense.
GENERAL PROJECT REQUIREMENTS 01002 - Page 2 of 7