10.03.2015 Views

Specs

Specs

Specs

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Bridgestone Retail Operations LLC..<br />

Invitation to Bid<br />

H. CUSTOMER DRINKING FOUNTAIN<br />

63. Is the spout of one customer drinking fountain at or below a height of 37”<br />

or is there an adjacent cup dispenser with round (not pointed) bottom cups<br />

at 48"h max?<br />

1 Measure along the approximate longitudinal center line, near the top, middle and bottom, for both front/back slope and cross slope. If either the<br />

average or any two of the three measurements for front/back or cross slope exceeds the Allowable Tolerance, that slope condition will be considered<br />

non-conforming.<br />

2<br />

If the lavatory is less than 17" deep (as measured from the lavatory face to the rear wall), measure from a point 17" from the rear wall.<br />

© 2002 - Universal Designers & Consultants, Inc.<br />

4/8/02 www.UniversalDesign.com Page 7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!