Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
Operation Manual: Furnish two copies, bound in 1 inch diameter three ring binders,
indexed and tabbed for easy reference, and labeled on spine and cover. Manual
shall include following:
a. Approved submittals as specified herein.
b. Installation instructions including mounting details for control valves.
c. Operating Instructions:
1) Winterization procedures
2) Recommended operation sequence, frequency, and length of
operation cycle, as per relationship to estimated absorption rate,
evaporation rate, and anticipated flow.
d. Maintenance Instructions:
1) Manufacturers' product data, installation, and maintenance
instructions.
2) Copies of completed warranty information. Contractor to complete and
mail necessary warranty registration information to manufacturer
keeping copies for
B. Controller Chart: Prepare color coded chart, reduced in size, containing same plan
information as As-Built drawings, and laminated in plastic on both sides, with following
specific information:
1. Note routing of control wires.
2. Identify valves as to size, station number shown on controller, and type of
irrigation head (e.g. spray head, turf head) on each valve.
3. Delineate each station's limits of coverage by color-coding, with each station
having different color showing its zone with zone number designation.
1.06 DELIVERY, STORAGE, AND HANDLING
A. Store and handle materials to prevent damage and deterioration.
B. Provide secure, locked storage for valves, sprinkler heads, and similar components that
cannot be immediately replaced, to prevent installation delays.
1.07 PROJECT CONDITIONS
A. Call proper authorities to locate all underground utilities.
B. Protect existing trees, plants, lawns, and other features designated to remain as part of
the final landscape work.
C. Promptly notify the Landscape Architect of unexpected sub-surface conditions.
D. Irrigation system layout is diagrammatic. Exact locations of piping, sprinkler heads,
valves, and other components shall be established by Contractor in the field at time of
installation and approved by the Landscape Architect.
1.08 WARRANTY
A. Guarantee installation for 1 year from date of final acceptance for the following:
1. Defects in material, equipment, and workmanship.
2. Repair of damage to premises resulting from leaks or other defects in material,
equipment, and workmanship to satisfaction of Owner.
B. Repairs, if required, shall be done promptly at no cost to Owner.
C. Parts Manufacturers’ warranties shall be provided to Owner.
IRRIGATION SYSTEM 02810 - Page 2 of 8