Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
C. Submit updated schedule with each Application for Payment.
D. Refer to Invitation To Bid Section 15: Scheduling, for additional requirements.
2.04 SUBMITTALS FOR REVIEW and/or APPROVAL
A. Shop Drawings and Information will be required as listed below:
1 Structural Steel and Joists (Wood structures if applicable)
2 Anchor Bolt Details
3 Reinforcing Steel in Concrete & Masonry
4 Storefront Glazing
5 Mechanical Equipment (see Section 15010)
6 Interior and Exterior Luminaries
7 Electrical Switch-gear and Panel-boards
8 Fire Alarm
9 Sprinkler (If applicable)
10 Plumbing Fixtures
11 Concrete and Mortar Mix Designs
12 Doors & Hardware
PART 3 SUBMITTALS
3.01 NUMBER OF COPIES OF SUBMITTALS
A. Documents for Review:
1. Small size sheets, not larger than 8-1/2 x 11 inches: Submit the number of copies which the
Contractor requires, plus two copies which will be retained by the Owner's Representative.
2. Larger Sheets, Not Larger Than 36 x 48 inches: Submit one reproducible transparency and
one opaque reproduction.
3.02 SUBMITTAL PROCEDURES
A. Transmit each submittal with approved form.
B. Sequentially number the transmittal form. Revise submittals with original number and a sequential
alphabetic suffix.
C. Identify Project, Contractor, Subcontractor or Supplier; pertinent drawing and detail number, and
specification section number, as appropriate on each copy.
D. Apply Contractor's stamp, signed or initialed certifying that review, approval, verification of
Products required, field dimensions, adjacent construction Work, and coordination of information is
in accordance with the requirements of the Work and Contract Documents.
E. Deliver submittals to and as designated by the Owner's Representative.
F. Schedule submittals to expedite the Project, and coordinate submission of related items.
G. For each submittal for review, allow 15 days excluding delivery time to and from the Contractor.
H. Identify variations from Contract Documents and Product or system limitations which may be
detrimental to successful performance of the completed Work.
I. Provide space for Contractor and Owner's Representative review stamps.
J. When revised for resubmission, identify all changes made since previous submission.
K. Distribute copies of reviewed submittals as appropriate. Instruct parties to promptly report any
inability to comply with requirements.
END OF SECTION
ADMINISTRATIVE REQUIREMENTS 01300 - Page 2 of 2