Specs

Bridgestone Retail Operations LLC..
Invitation to Bid
BFRC Post-ADAAG Stores Contractor ADA Compliance Certification Form
(This form may only be utilized for BFRC stores which had first occupancy of any type after 1/26/93)
Inspection Date:
Store Number:
Store Address:
Store Type: Pre-ADAAG
(Check one) Post-ADAAG
Store Phone #:
Store Manager on Duty Signature (Required):
Inspector Name (Print):
Contractor Co:
Inspection Results: Full Compliance
(Check one) Non-Compliant Issues
Contractor Phone:
Inspector Signature (Required):
Date:
Instructions for Completing the BFRC Contractor ADA Compliance Certification Form:
1. If the store does not have a specific feature, check the NA box.
2. For each question that can be answered, check Y for yes or N for no.
3. Any question answered "No" must be reviewed with your BFRC representative.
4. Use a calibrated 24" long slope meter or 24" long level and tape measure to determine slopes along the approximate longitudinal center
line, near the top, middle and bottom, for both front/back slope and cross slope. If either the average or any two of the three measurements
for front/back or cross slope exceeds the Allowable Tolerance, that slope condition will be considered non-conforming.
© 2002 - Universal Designers & Consultants, Inc.
4/8/02 www.UniversalDesign.com Page 1