Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
S. CONTROLLED MATERIALS
1. Where materials are required by the Governing Building Codes to be certified by an
accredited authoritative agency as meeting accepted engineering standards for quality, the
certification shall be furnished by the Contractor.
T. SCHEDULES & ESTIMATES
1. Immediately after execution and delivery of the contract, the Contractor shall deliver to the
Owner a "Building Progress Schedule" showing the proposed dates of commencement and
completion of each of the various sub-divisions of work required under this project.
Contractor shall keep schedule updated at least bi-weekly.
2. Within twenty (20) days after execution of Contract, Contractor shall name all Subcontractors
and material dealers from whom materials will be purchased for this project.
3. In the case that work is not completed within the allotted time frame the Contractor will be
responsible for Liquidated Damages.
4. He shall submit a breakdown (Schedule of Values) of the contract price, by trade, to the
Owner on the Schedule of Value form. This "Schedule of Values" when approved by Owner
shall be the basis of computing monthly estimates of work completed on the project.
U. SHOP DRAWINGS
1. Contractor shall submit with such promptness as to cause no delay in his own work or in that
of any other Contractor, three copies of all shop or setting drawings and schedules required
for the work of the various trades. Owner shall waive the requirement of all shop drawing
submittals when Contractor intends to supply materials exactly matching the drawings and
specifications with the exception of: pre-engineered building reaction loads and anchor bolt
layouts; reinforcing steel; HVAC equipment. Contractor must submit shop drawings for all
proposed "equal” substitution products. Owner shall pass upon submitted drawings with
reasonable promptness making desired corrections, including all necessary corrections
relating to artistic effect. Contractor shall make all corrections required by Owner, file with him
two corrected copies and furnish such other copies as may be needed. Owner's approval of
such drawings or schedules shall not relieve Contractor from responsibility for deviations
from drawings or specifications, unless he had in writing called Owner's attention to such
deviations at the time of submission, nor shall it relieve him from responsibility for errors of
any sort in shop drawings or schedule.
V. PERMITS AND FEES
1. Refer to Invitation To Bid Section 13: Permits, Fees and Inspections.
W. MODEL ENERGY EFFICIENCY CODE REQUIREMENTS
1. When required, Contractor shall obtain and submit the fully executed Energy Efficiency-
Forms and Calculations to the governing authorities having jurisdiction. Contractor shall
furnish Owner with a copy of the executed form and calculations. All fees pertaining to the
above shall be paid by the Contractor.
GENERAL PROJECT REQUIREMENTS 01002 - Page 5 of 7