Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
SECTION 10810
TOILET ACCESSORIES
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Toilet Room Accessories.
1.02 QUALITY ASSURANCE
A. Manufacturer Qualifications: Minimum five (5) years of documented experience producing
products of the types specified in this section.
B. Regulatory Requirements: Conform to ADAAG requirements.
1.03 SUBMITTALS
A. Sustainable Submittals: No submittals are required. Refer to Section 01352 for Sustainable
recommendations on this project.
PART 2 PRODUCTS
2.01 MANUFACTURERS
A. Acceptable Manufacturers:
1. ASI-American Specialties, Inc. (BSRO Vendor), (901) 312-6195.
2. Bobrick
3. Bradley
4. Or Equal
B. Supply all products of this section from a single manufacturer.
2.02 TOILET ACCESSORIES
A. Paper Towel Dispenser and Disposal: Model Bradley 235-10.
B. Sanitary Napkin Disposal: Model Bobrick B-254.
C. Toilet Paper Holder: Model Bobrick B-2740.
2.03 MIRRORS
A. Mirror: Model Bradley 740-1836.
1. Frame: Angle.
2. Mirror: Tempered glass.
3. Size: As indicated on drawings.
4. Finish: No.4 satin stainless steel.
B. Angle Mirror Frames: Fabricated from 0.050 inch stainless steel, formed to 3/4 by 5/8 inch angle;
heliarc-welded corners, finished to match sheet finish; concealed "H" type mounting bracket with
tamper-proof fasteners.
C. Glass Mirror: 1/4 inch thick float glass, ASTM C 1036, Type I, Class 1, quality q1 mirror select;
silver-coated, hermetically sealed with uniform electrolytically-deposited copper plating.
2.04 GRAB BARS
A. Grab Bars - Basic Requirements: Fabricated to comply with ASTM F 446 and to withstand a 900
pound force, from ASTM A 554 stainless steel tubing, 0.050 inch, Type 304, 18-8 alloy; formed 1-
1/2 inch radius return to wall at each end; each end heliarc-welded to minimum 11 gage stainless
steel circular flange; welds finished to match tube finish.
B. Grab Bars: Series Bobrick B-6206..
1. Sizes and configurations: As indicated on drawings.
C. Grab Bar Concealed Mounting Flanges: Stainless steel, 3 inch diameter by 1/2 inch deep, with
0.0897 inch steel tenon plate for concealed attachment, using three set screws.
TOLIET ACCESSORIES 10810 - Page 1 of 2