Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
SECTION 15146
PLUMBING SPECIALTIES
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Floor drains.
B. Cleanouts.
C. Hose bibs.
D. Trench Drains
E. Backflow preventers.
F. Thermostatic Mixing Valves.
G. Trap Primers.
PART 2 PRODUCTS
2.01 DRAINS
A. Floor Drains
1. Manufacturers: Subject to compliance with requirements, provide product by one of the
following.
2. Basis-of-Design Product: J.R. Smith or comparable product by one of the following.
a. Zurn
3. ASME A112.21.1M; lacquered cast iron two piece body with double drainage flange, weep
holes, reversible clamping collar, and round, adjustable nickel-bronze strainer.
2.02 CLEANOUTS
A. Cleanouts at Exterior Surfaced Areas (GCO):
1. Manufacturer: Subject to compliance with requirements, provide product by one of the
following.
2. Basis-of-Design Product: J.R. Smith or comparable product by one of the following.
a. Wade
b. Zurn
3. Round cast nickel bronze access frame and non-skid cover.
B. Cleanouts at Interior Finished Floor Areas (FCO):
1. Manufacturer: Subject to compliance with requirements, provide product by one of the
following.
2. Basis-of-Design Product: J.R. Smith or comparable product by one of the following.
a. Wade
b. Zurn
3. Lacquered cast iron body with anchor flange, reversible clamping collar, threaded top
assembly, and round gasketed scored cover in service areas and round gasketed depressed
cover to accept floor finish in finished floor areas.
C. Cleanouts at Interior Unfinished Accessible Areas SCO/WCO: Caulked or threaded type. Provide
bolted stack cleanouts on vertical rainwater leaders.
2.03 HOSE BIBBS, HYDRANTS, VALVES, AND WATER HAMMER ARRESTORS
A. Interior Hose Bibbs:
1. Manufacturer: Subject to compliance with requirements, provide product by one of the
following.
2. Basis-of-Design Product: Chicago Faucet or comparable product by one of the following.
a. Watts
b. Woodford
PLUMBING SPECIALITIES 15146 - Page 1 of 3