Specs

Bridgestone Retail Operations LLC..
Invitation to Bid
BFRC Post-ADAAG Stores ADA Consent Decree Compliance Certification Program
Dear Contractor,
The information you provide is critical to assuring that BFRC facilities are in compliance with the BFRC Americans with Disabilities Act
Consent Decree requirements. You will be verifying that at the time of your inspection you have recorded the true and accurate conditions of
the items indicated on the Contractor ADA Compliance Certification Form.
1. Initial Inspection
a. Tools needed include:
- Clip Board
- Pencil with eraser and black pen (erasable type suggested)
- Post-ADAAG Store BFRC Contractor ADA Compliance Certification Form (attached)
- Tape measure (24' minimum length, retractable 'lever-lock' recommended)
- 24" Digital SMARTTOOL or 24" level
b. Answer questions by checking-off appropriate boxes and writing comments in pencil.
c. Take measurements to within 1/8".
d. Several initial questions require making a determination as to whether an "accessible route" exists. When answering these questions,
you must be aware of the accessibility features required for an accessible route as described on that page.
2. Review and Revise
a. Review any negative answers with your BFRC representative and request a change order to make any necessary accessibility
enhancements to the facility.
b. Complete any accessibility enhancements approved by the BFRC representative and revise the certification form accordingly.
c. Review any remaining negative answers with your BFRC representative.
d. Finalize the report, completing it in black ink pen and assuring that:
◦ Each question is answered
◦ The store # is written at the top of each page
◦ All information, including comments, is legible
◦ All comments are adjacent to the question they refer to
e. Make a copy for your records as you may need to refer to it if there are any questions.
f. Submit the original to your BFRC representative.
© 2002 - Universal Designers & Consultants, Inc.
4/8/02 www.UniversalDesign.com Page #