Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
SECTION 02810
IRRIGATION SYSTEM
PART 1 GENERAL
1.01 DESCRIPTION
A. Provide an underground irrigation system as shown and specified. The work includes:
1.02 QUALITY ASSURANCE
1. Automatic/manual irrigation system including piping, fittings, sprinkler heads, and
accessories.
2. Valves, backflow preventer, and fittings.
3. Controller, control wire and mounting accessories.
4. Testing
5. Excavating and backfilling irrigation system work.
6. Associated plumbing and accessories to complete the system.
7. Extended 2-Year Maintenance Agreement (ALTERNATE BID).
A. lnstaller’s Qualifications:
1. Minimum of 5 years experience installing irrigation systems of comparable size.
2. Must be State Licensed Irrigator.
1.03 MATERIAL AND METHODS:
A. Materials, equipment, and methods of installation shall comply with the following codes
and standards:
1. Uniform Plumbing Code,(UPC)published by the Western Plumbing Officials’
Assoc.
2. National Fire Protection Association, (NFPA): National Electric code.
3. American Society for Testing and Materials, (ASTM).
4. National Sanitation Foundation, (NSF).
5. The Irrigation Association, (IA).
1.04 REFERENCS
American Society for Testing and Materials (ASTM)
ASTM D2239 - Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside
Diameter
ASTM D2241 - Poly (Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR-Series)
ASTM D2564 - Solvent Cement for poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings
ASTM D2609 - Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
ASTM D2855 - Making Solvent-Cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and
Fittings
National Fire Protection Agency (NFPA)
1. NFPA 70 - National Electrical Code (NEC)
1.05 SUBMITTALS (Refer to Section 01300)
A. Project Record Documents:
As-Built Drawings: Furnish two sets, noting exact locations of elements and changes to
Construction Drawings.
IRRIGATION SYSTEM 02810 - Page 1 of 8