10.03.2015 Views

Specs

Specs

Specs

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Bridgestone Retail Operations, LLC<br />

PROJECT MANUAL<br />

Version: January 2012<br />

2.02 LATH<br />

4. Western Metal Lath Company, Riverside, CA (909) 360-3500.<br />

B. Metal Accessories:<br />

1. Fry Reglet Corporation (626) 289-4744.<br />

2. Kwik Corner Accessories.<br />

3. Western Metal Lath Company (909) 360-3500.<br />

4. Stockton Products (510) 351-6700.<br />

A. Expanded-Metal Lath: ASTM C 847.<br />

1. Material: Structural-quality galvanized steel sheet complying with ASTM A 653, G60<br />

minimum coating designation, unless otherwise indicated.<br />

B. Paper Backing:<br />

1. Comply with FS UU-S-790A, Type 1 Grade D, Style 2 vapor-permeable paper.<br />

2.03 ACCESSORIES<br />

A. General: Provide metal accessories required for a complete installation, complying with<br />

ASTM C 1063 and the requirements indicated below. Coordinate depth of accessories with<br />

thicknesses and number of plaster coats required.<br />

1. Galvanized Steel Components: Fabricated from minimum 0.0172 inch galvanized<br />

steel sheet complying with ASTM A 653, G40 minimum coating designation.<br />

2. Aluminum Components: Fabricated from 0.050 inch extruded aluminum, 6063-T5<br />

alloy and temper, with clear anodized finish, complying with ASTM B 221.<br />

B. Metal Corner Reinforcement: Expanded, large-mesh, welded-wire mesh diamond-metal lath<br />

fabricated from 0.0475-inch-diameter galvanized wire and specially formed to reinforce<br />

external corners of portland cement stucco on exterior exposures while allowing full stucco<br />

encasement.<br />

C. Casing Beads: Galvanized steel or aluminum square-edged style with expanded flanges.<br />

D. Control Joints: Prefabricated, galvanized steel or aluminum. Two-piece stucco control<br />

screed with adjustable opening for joint widths from 1/8 to 5/8 inch. Provide removable<br />

protective tape on stucco face of control joints.<br />

E. Weep Screed: Manufacturer's standard profile designed for use at sill plate line to form<br />

stucco stop and prevent stucco from contacting damp earth, fabricated from galvanized steel<br />

sheet.<br />

F. Vent Screed: Galvanized steel or aluminum vented stucco channel screed.<br />

G. Drip Screed: Galvanized steel or aluminum vented drip screed.<br />

H. Channel Screed: Galvanized steel or aluminum stucco channel screed.<br />

I. Reglet: Galvanized steel or aluminum, stucco type reglet.<br />

J. Lath Attachment Devices: Material and type required by ASTM C 1063 for installations<br />

indicated.<br />

STUCCO 09245 - Page 2 of 4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!